YUKEN MCP/MCT Check Valve Series | NG6, NG10 Modular

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the YUKEN MCP and MCT series. These are modular check valves in sandwich plate design, available for P-line (MCP) or T-line (MCT) control, with selectable cracking pressures.
Conatct For Details
DetailReview(0)Additional

YUKEN MCP/MCT Check Valve Series

Overview:

HYRIG can supply the YUKEN MCP and MCT series and related hydraulic components. These sandwich-mounted check valves allow free flow in one direction and block flow in the reverse direction, used for isolation in specific channels.

Key Specifications & Model Comparison

Model CodeSizeControlled LineCracking PressureMax Flow
MCP-01-2-30NG6P0.2 MPa35 L/min
MCP-01-0-30NG6P0.035 MPa35 L/min
MCP-01-4-30NG6P0.4 MPa35 L/min
MCT-01-2-30NG6T0.2 MPa35 L/min
MCP-03-2-10NG10P0.2 MPa70 L/min
MCT-03-2-10NG10T0.2 MPa70 L/min

Data source: YUKEN catalog and distributor listings.

For the NG6 P-line 0.2 MPa variant, view YUKEN MCP-01-2-30.

Note: MCA-04 and MCPT-03 are special variants; contact factory for confirmation.

Dimensions (Text-Based)

Parameter01 (NG6)03 (NG10)
Mounting StandardISO 4401-03ISO 4401-05
Mounting Bolt Pattern4 × M54 × M6
Approx. Weight1.1 kg2.0 kg

Cross-Reference & Replacement

The MCP/MCT/MCA/MCB/MCW prefix indicates which channel is controlled (P/T/A/B/A&B). The cracking pressure code (0/2/4 = 0.035/0.2/0.4 MPa) must match the original circuit. The 30 series (01 size) and 10 series (03 size) have unchanged installation dimensions.

Selection Support

Need to confirm which channel (P/T/A/B) or cracking pressure is required? Contact HYRIG with your circuit requirements, and we will confirm the correct MCP/MCT model code.

Applications

Used for pilot-line isolation and leakage-free blocking in hydraulic systems, particularly where a specific channel must be blocked without affecting other lines.

Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.

Specifications:

  • Valve Type: Modular check valve (sandwich plate)
  • Sizes: 01 (NG6), 03 (NG10)
  • Controlled Lines: MCP = P-line; MCT = T-line; MCA = A-line; MCB = B-line; MCW = A&B lines
  • Cracking Pressure Codes: 0 = 0.035 MPa, 2 = 0.2 MPa, 4 = 0.4 MPa
  • Maximum Operating Pressure: 31.5 MPa (01 size); 25 MPa (03 size)
  • Maximum Flow: 01 size: 35 L/min; 03 size: 70 L/min

Contact Us:

For YUKEN MCP/MCT series selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit