YUKEN RG & RCG Subplate Reducing Valves
Overview:
HYRIG can supply the YUKEN RG and RCG series and related hydraulic components. These valves are used for stable pressure reduction in subplate-mounted hydraulic systems. The RCG version includes a built-in check valve for reverse free flow.
| Model Code | Size | Max Primary Pressure | Max Flow | Reverse Flow |
|---|---|---|---|---|
| RG-03 | 03 | 21 MPa | 30–40 L/min | No |
| RG-06 | 06 | 21 MPa | Contact factory | No |
| RCG-03 | 03 | 21 MPa | 30–40 L/min | Yes |
| RCG-06 | 06 | 21 MPa | Contact factory | Yes |
Data source: YUKEN catalog and distributor listings.
| Parameter | Size 03 | Size 06 |
|---|---|---|
| Mounting Standard | ISO 6264 (CETOP 3) | ISO 6264 (CETOP 5) |
| Mounting Bolt Pattern | 4 × M5 | 4 × M6 |
When replacing a YUKEN subplate reducing valve, confirm whether the original had a check valve (RCG) or not (RG). The RCG is required if the actuator must retract freely without passing flow back through the reducing spool.
Not sure if your system requires the RCG's reverse flow feature? Describe your actuator behavior, and HYRIG will recommend the correct valve.
Used in hydraulic power units and machine tools where reduced pressure is needed on a subplate, with or without reverse free flow.
Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.
Specifications:
Contact Us:
For YUKEN RG/RCG selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.