YUKEN MRP/MRA/MRB Modular Reducing Valves
Overview:
HYRIG can supply the YUKEN MRP, MRA, and MRB series and related hydraulic components. These sandwich-mounted valves provide stable secondary pressure reduction for specific branches of a hydraulic circuit.
| Model Code | Reducing Line | Size | Max Pressure | Max Flow |
|---|---|---|---|---|
| MRP-01 | P-line | 01 | 35 MPa | 60 L/min |
| MRA-01 | A-line | 01 | 35 MPa | 60 L/min |
| MRB-01 | B-line | 01 | 35 MPa | 60 L/min |
| MRP-03 | P-line | 03 | Contact factory | Contact factory |
| MRA-03 | A-line | 03 | Contact factory | Contact factory |
| MRB-03 | B-line | 03 | Contact factory | Contact factory |
Data source: YUKEN catalog and distributor listings.
Note: Specific flow and pressure parameters for the 03 size are confirmed at order entry based on the spring range.
| Parameter | Size 01 | Size 03 |
|---|---|---|
| Mounting Standard | ISO 4401-03 | ISO 4401-05 |
| Mounting Bolt Pattern | 4 × M5 | 4 × M6 |
When replacing a YUKEN modular reducing valve, confirm which line (P, A, or B) requires reduction. Verify the required secondary pressure range and ensure the sandwich module fits your manifold stack.
Need to reduce pressure on a specific actuator line? Tell us your primary pressure and desired secondary pressure, and HYRIG will provide the correct MRP/MRA/MRB model code.
Used in hydraulic manifolds to provide reduced pressure for pilot circuits, clamping systems, or specific actuators without affecting the main system pressure.
Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.
Specifications:
Contact Us:
For YUKEN MRP/MRA/MRB selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.