YUKEN S-BG Low Noise Relief Valve Series
Overview:
HYRIG can supply the YUKEN S-BG series and related hydraulic components. The S-BG valves are specifically designed for low-noise operation and can be remotely controlled via a vent port.
| Model Code | Size | Max Flow | Max Pressure | Pressure Range | Weight |
|---|---|---|---|---|---|
| S-BG-03 | 03 | 100 L/min | 25 MPa | 0.4–25 MPa | ~4.1 kg |
| S-BG-06 | 06 | 200 L/min | 25 MPa | 0.4–25 MPa | ~5.0 kg |
| S-BG-10 | 10 | 400 L/min | 25 MPa | 0.4–25 MPa | ~10.5 kg |
Data source: YUKEN catalog and distributor listings.
| Parameter | Size 03 | Size 06 | Size 10 |
|---|---|---|---|
| Mounting Standard | ISO 6264 (CETOP 3) | ISO 6264 (CETOP 5) | ISO 6264 |
| Mounting Bolt Pattern | 4 × M5 | 4 × M6 | 4 × M8 |
The S-BG series is designed for systems where noise reduction is critical. When replacing an existing unit, verify the pressure range and port size. Ensure the remote control port is piped correctly if the original system uses it.
If you need to replace a noisy relief valve, HYRIG can help you select the appropriate S-BG size based on your flow and pressure requirements.
Used in hydraulic power units, industrial machinery, and test stands where low noise operation is required.
Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.
Specifications:
Contact Us:
For YUKEN S-BG series selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.