HYRIG can supply the Z63Y series welded connection mud gate valve range and its replacement parts. The Z63Y-100-35 is a manual, rising-stem gate valve with a 4" (DN100) bore, engineered for abrasive drilling mud service at pressures up to 5,000 psi (35 MPa). It features weld-end connections and a precision-lapped metal-to-metal (hard) seal for permanent manifold integration.
| Model Number | Nominal Diameter | Working Pressure | L (Length) | H (Height) | A (Width) |
|---|---|---|---|---|---|
| Z63Y-100-35 | 100 mm (4") | 35 MPa (5,000 psi) | 330 mm | 630 mm | 90 mm |
| Z63Y-100-70 | 100 mm (4") | 70 MPa (10,000 psi) | 330 mm | 630 mm | 90 mm |
Data source: Technical data table.
Need a higher pressure rating? View the Z63Y-100-70 Welded Valve or explore the full Z63Y Welded Mud Valve Series.
The exact footprint for the Z63Y-100-35 is:
These dimensions are critical for replacing existing welded valves. Verify your current pipe cut-out length before ordering.
The Z63Y series utilizes a parallel metal-to-metal sealing design (indicated by the "Y"). The solid slab gate is sandwiched between two floating seat rings. The welding ends eliminate potential leak paths of threaded or flanged joints, providing a robust solution for abrasive mud. Hard-facing on the seats ensures long-term reliability.
Replacing an older welded mud valve? Here is what to verify:
The Z63Y-100-35 is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the 5,000 psi rating is sufficient? Tell us your manifold working pressure, and our engineers will match the correct Z63Y model.
We supply replacement parts for the Z63Y-100 series, including gate and seat assemblies, stem packing kits, and handwheels. See our Z63Y Welded Mud Valve Parts page for compatible repair kits.
Q: What is the maximum pressure for the Z63Y-100-35?
A: The maximum working pressure is 35 MPa (5,000 psi).
Q: What is the face-to-face length of this valve?
A: The overall length (L) is 330 mm.
Q: Does this valve use metal-to-metal sealing?
A: Yes. The "Y" in Z63Y indicates a hard metal-to-metal seal.
Q: What is the typical lead time?
A: Standard lead time is 20-25 days. Contact us for expedited options.
For Z63Y-100-35 welded mud gate valve selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.