The back guide pole assembly is a critical alignment component of the ZQ127/25Y TEDA master tong, working in conjunction with the two fore guide poles to maintain proper alignment between the master tong and the backup tong during clamping and torque application. This rear guidance system provides additional stability at the rear of the tong assembly, ensuring smooth operation, even die wear, and consistent gripping performance. Regular inspection and lubrication of these components prevent binding and misalignment during drill pipe, tubing, and casing operations.
Sleeve (Item 1 – Purchase No. ZQ25-175, Part No. ZQ25.4-1, quantity 1): The sleeve provides a protective and guiding surface for the back guide pole assembly. It may serve as a bushing or spacer within the assembly, reducing direct metal‑to‑metal contact. Inspect for wear or scoring – replace if the internal bore is damaged.
Back Guide Pole Assembly (Item 2 – Purchase No. ZQ25-170, Part No. ZQ25.4.1, quantity 1): The complete back guide pole assembly is supplied as a pre‑assembled unit that includes the guide pole, spring, and securing hardware. This simplifies replacement and ensures all matching components are correctly fitted.
Back Guide Pole Spring (Item 3 – Purchase No. ZQ25-172, Part No. XYQ12.HD-06A, quantity 1): A compression spring that assists in returning the guide pole to its extended position and absorbs shock during clamping. The spring maintains preload and reduces impact loads on the guide mechanism. Replace the spring if it shows signs of corrosion, fatigue, or loss of free length.
Back Guide Pole (Item 4 – Purchase No. ZQ25-171, Part No. XYQ12.HD-03(1C), quantity 1): The back guide pole is a precision‑ground cylindrical rod that slides within the guide pole seat and sleeve. It provides linear guidance for the master tong during axial movement at the rear position. The pole surface must be smooth and free from scoring or bending. Inspect regularly for wear – a worn guide pole causes lateral play and misalignment between the master and backup tongs.
Back Guide Pole Seat (Item 5 – Purchase No. ZQ25-169, Part No. XYQ12.HD-01, quantity 1): The guide pole seat is the housing that supports the back guide pole and spring. It is bolted to the tong structure and provides a precision‑machined bore for the pole and sleeve. The seat also retains the spring and positions the assembly correctly. Inspect the bore for wear and the mounting surfaces for damage.
Pin Shaft (Item 7 – Purchase No. ZQ25-173, Part No. XYQ12.HD-06A, quantity 1): The pin shaft secures the back guide pole assembly to the tong structure. It passes through the seat and the mounting bracket, allowing pivoting or fixed attachment as designed. Check for bending or thread damage.
Cotter Pin 3.2×20 (Item 6 – Purchase No. ZQ25-174, Part No. GB91, quantity 1): The cotter pin locks the pin shaft in place, preventing it from loosening under vibration. It is a safety‑critical component – always use a new cotter pin during reassembly and bend the legs securely.
Back Guide Pole Assembly Operation
The back guide pole (Item 4) slides within the guide pole seat (Item 5) and sleeve (Item 1) during axial movement.
The spring (Item 3) maintains preload and absorbs shock loads during clamping.
The guide pole guides the master tong at the rear position during clamping and release.
Proper alignment ensures even die engagement with the pipe.
The pin shaft (Item 7) and cotter pin (Item 6) secure the assembly.
Guide Pole System Overview
The ZQ127/25Y uses a combination of guide poles to maintain proper alignment:
Fore Guide Poles (2): Primary alignment between master and backup tongs.
Back Guide Pole (1): Additional guidance and stability at the rear of the tong.
Together, these guide poles ensure smooth axial movement and consistent gripping performance during all drill pipe, tubing, and casing operations.
Maintenance and Inspection Points
Inspect the back guide pole for scoring, rust, or straightness – replace if bent or worn.
Check the spring for free length and compression force – replace if weakened.
Inspect the sleeve bore for wear – replace if worn.
Inspect the guide pole seat bore for wear – replace if worn.
Lubricate the guide pole and sleeve with a light coat of grease to reduce friction.
Verify the pin shaft is secure and the cotter pin is properly bent.
Test axial movement by manually moving the master tong to confirm smooth, bind‑free travel.
Ordering and Replacement Guidance
When ordering components for the back guide pole assembly, always reference both the Purchase No. and Part No. The complete back guide pole assembly (ZQ25-170) is the easiest replacement option. Individual components such as the guide pole (ZQ25-171), spring (ZQ25-172), and seat (ZQ25-169) are also available separately. Always replace cotter pins (ZQ25-174) with new ones during reassembly.
For assistance with part identification, assembly guidance, or to place an order for any ZQ127/25Y TEDA back guide pole component, please contact us via email at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.