ZQ127/25Y TEDA Drill Pipe Power Tong – Easy-Damaged Parts Components

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The ZQ127/25Y TEDA easy-damaged parts list identifies 19 component types subject to normal wear requiring regular replacement. Key wear items include 37 Centralizing Roller Shafts with 37 Rollers, 79 Slotted Countersunk Screws M5×10, Dies (2-3) in sets of 24 each, 16 Rollers with 16 Pin Shafts, 168 Rollers Φ10×30, 6 Friction Discs, and O-rings in various sizes (22×2.4 through 80×3.1). Regular inspection and replacement of these components ensure optimal performance and minimize downtime.

Conatct For Details
DetailReview(0)Additional

The easy-damaged parts list comprises components that are subject to normal wear and tear during routine tong operation. These items require regular inspection and periodic replacement to maintain optimal performance, prevent secondary damage, and ensure operator safety. Maintaining adequate stock of these high-wear spares is essential for minimizing downtime during well workover operations. The list includes mechanical components, gripping elements, sealing components, and fastening hardware.

Centralizing Components

Centralizing Roller Shaft (Item 1 – Purchase No. ZQ25-13, Part No. ZQ25.1-3, quantity 37) and Centralizing Roller (Item 2 – Purchase No. ZQ25-14, Part No. XYQ12.Z-03, quantity 37): Thirty-seven centralizing roller shafts with matching centralizing rollers keep the tong head centred within the shell during rotation. They reduce friction and maintain concentric alignment. Worn or flat‑spotted rollers cause vibration and uneven loading. Replace in sets when worn.

Slotted Countersunk Screw M5×10 (Item 3 – Purchase No. ZQ25-16, Part No. GB68, quantity 79): Seventy-nine slotted countersunk screws securing various components throughout the tong. Replace during major overhauls or if thread damage is evident.

O-Rings and Seals

O‑rings provide critical sealing throughout the hydraulic system and transmission. All O‑rings should be replaced during every major overhaul:

  • O-ring 28×2.4 (Item 4 – Purchase No. ZQ25-33, Part No. GB1235, quantity 2)

  • O-ring 24×2.4 (Item 5 – Purchase No. ZQ25-37, Part No. GB1235, quantity 8)

  • O-ring 36×3.5 (Item 6 – Purchase No. ZQ25-40, Part No. GB1235, quantity 4)

  • O-ring 32×3.5 (Item 7 – Purchase No. ZQ25-43, Part No. GB1235, quantity 2)

  • O-ring 38×3.5 (Item 8 – Purchase No. ZQ25-45, Part No. GB1235, quantity 2)

  • O-ring 63×5.7 (Item 12 – Purchase No. ZQ25-77, Part No. GB1235, quantity 16)

  • O-ring 40×3.1 (Item 14 – Purchase No. ZQ25-97, Part No. GB1235, quantity 2)

  • O-ring 80×3.1 (Item 15 – Purchase No. ZQ25-99, Part No. GB1235, quantity 2)

  • O-ring 45×3.1 (Item 17 – Purchase No. ZQ25-140, Part No. GB1235, quantity 8)

  • O-ring 22×2.4 (Item 18 – Purchase No. ZQ25-142, Part No. GB1235, quantity 8)

  • O-ring 50×3.1 (Item 19 – Purchase No. ZQ25-150, Part No. GB1235, quantity 2)

Gripping and Die Components

Dies (2-3) (Item 9 – Purchase No. ZQ25-65, Part No. XYQ12.Z-01.12(2-3), quantity 24 each): Twenty-four dies of each type (2 and 3) providing the gripping teeth that directly contact the pipe. Die (2) covers 89-114mm range; Die (3) covers 121-156mm range. Dies are consumable items – replace when teeth become blunt, chipped, or worn.

Roller (Item 10 – Purchase No. ZQ25-72, Part No. XYQ12.Z-48, quantity 16) and Pin Shaft (Item 11 – Purchase No. ZQ25-73, Part No. XYQ12.Z-49, quantity 16): Sixteen rollers with matching pin shafts used in various tong mechanisms. Inspect for flat spots, scoring, or wear – replace as sets when damaged.

Roller Φ10×30 (Item 13 – Purchase No. ZQ25-78, quantity 168): One hundred sixty-eight cylindrical rollers measuring 10mm diameter by 30mm length. These rollers provide bearing surfaces within the transmission assemblies. Replace all rollers as a set during major overhauls – never mix old and new rollers.

Friction Disc (Item 16 – Purchase No. ZQ25-117, Part No. ZQ25.1.8-2, quantity 6): Six friction discs that are the primary wear elements in the brake mechanism. Replace when friction material is worn or glazed; always replace all six simultaneously.

Spare Parts Management Recommendations

  • Maintain a minimum stock of all easy-damaged parts to avoid delays during field repairs.

  • Dies are the most frequently replaced items – ensure adequate stock of both types.

  • Store O-rings in a cool, dark place away from ozone and UV light to prevent degradation.

  • Keep rollers and shafts in clean, dry conditions to prevent corrosion.

  • Track usage to identify wear patterns and plan proactive replacements.

  • Use only genuine parts with the specified purchase numbers and part numbers.

Inspection Checklist

ComponentInspection PointAction if Worn
Centralizing rollersFlat spots, wearReplace in sets
Dies (2-3)Tooth conditionReplace in sets
Rollers (various)Flat spots, scoringReplace in sets
Friction discsWear, glazingReplace all 6
O-rings (all sizes)Cracking, hardeningReplace
Slotted countersunk screwsThread damageReplace

For technical support, parts identification, or to place an order for any ZQ127/25Y TEDA easy-damaged part, please contact us via email at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit