ZQ127/25Y TEDA Drill Pipe Power Tong – Backup Tong Tail Assembly Components

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The ZQ127/25Y TEDA Backup Tong Tail Assembly comprises 19 component types forming the complete hydraulic actuation and drive system at the rear of the backup tong. Key parts include the Shaft, Gear Cover, Duplex Gear, Rack Plunger, Cylinder Sleeve, 2 Pistons, 2 Cylinder Covers, Tail Seat, Tail Handle, Oil Passage Bolts, Hose Adaptors, and various O-rings (50×3.1, 45×3.1, 22×2.4). This assembly converts hydraulic pressure into mechanical movement for backup tong clamping.

Conatct For Details
DetailReview(0)Additional

The backup tong tail assembly is the rear section of the backup tong that houses the hydraulic actuation system and the gear drive mechanism. This assembly converts hydraulic pressure into mechanical movement for clamping the backup tong jaws. It incorporates a rack‑and‑pinion style actuation system with a rack plunger, duplex gear, and hydraulic cylinder components. Regular maintenance of this assembly ensures reliable backup tong operation and consistent counter‑torque performance.

Shaft (1) (Item 1 – Purchase No. ZQ25-148A, Part No. ZQ25.2-11A, quantity 1): The shaft supports the duplex gear and allows it to rotate within the housing. Inspect for wear or bending – replace if damaged.

Gear Cover (Item 2 – Purchase No. ZQ25-151A, Part No. ZQ25.2-13A, quantity 1): The gear cover encloses the duplex gear, protecting it from contamination. It is sealed with O‑ring 50×3.1. Inspect for cracks and ensure the sealing surface is clean.

O-ring 50×3.1 (Item 3 – Purchase No. ZQ25-150, Part No. GB1235, quantity 1): An O‑ring providing sealing between the gear cover and the housing. Replace during every major overhaul.

Duplex Gear (Item 4 – Purchase No. ZQ25-149, Part No. ZQ25.2-12, quantity 1): The duplex gear is a two‑stage gear that meshes with the rack plunger and transfers motion to the backup tong head. It converts the linear rack movement into rotation. Check both gear stages for tooth wear or damage.

Hex Head Bolt M16×40 (Item 5 – Purchase No. ZQ25-138, Part No. GB5781, quantity 4) and Standard Spring Washer 16 (Item 6 – Purchase No. ZQ25-137, Part No. GB93, quantity 4): Four hex head bolts with matching spring washers securing the tail assembly components. Torque to specification.

O-ring 45×3.1 (Item 7 – Purchase No. ZQ25-140, Part No. GB1235, quantity 4): Four O‑rings providing sealing between the cylinder components. Replace during every major overhaul.

Tail Handle (Item 8 – Purchase No. ZQ25-135, Part No. ZQ25.2-7, quantity 1): The tail handle provides a gripping point for operators to maneuver the backup tong during positioning. Inspect for secure attachment.

Cylinder Sleeve (Item 9 – Purchase No. ZQ25-156, Part No. ZQ25.2-16, quantity 1): The cylinder sleeve is the precision‑machined hydraulic cylinder bore within which the pistons operate. Inspect the cylinder bore for scoring or wear – any damage will cause hydraulic leakage and reduced actuation force.

Rack Plunger (Item 10 – Purchase No. ZQ25-157, Part No. ZQ25.2-17, quantity 1): The rack plunger combines a hydraulic plunger with a rack gear. Hydraulic pressure moves the plunger, which translates the rack linearly. The rack meshes with the duplex gear to convert linear motion into rotary motion. Inspect the rack teeth for wear and the plunger surface for scoring.

Nut M12 (Item 11 – Purchase No. ZQ25-194, Part No. GB/T41, quantity 2): Two nuts securing the tail assembly components. Torque to specification.

Tail Seat (Item 12 – Purchase No. ZQ25-15, Part No. ZQ25.2-15, quantity 1): The tail seat is the main structural mounting component at the rear of the backup tong. It provides the attachment point for the tail handle and houses the hydraulic cylinder assembly. Inspect for cracks or distortion.

Hex Bolt M12×90 (Item 13 – Purchase No. ZQ25-195, Part No. GB/T5780, quantity 2): Two hex bolts securing the tail assembly components. Torque to specification.

Piston (Item 14 – Purchase No. ZQ25-145, Part No. ZQ25.2-9, quantity 2): Two pistons operate within the cylinder sleeve, driven by hydraulic pressure. Inspect pistons for scoring or wear – replace if damaged.

O Check Ring 45 (Item 15 – Purchase No. ZQ25-141, Part No. GB1235-75, quantity 2): Two check rings providing additional sealing within the cylinder assembly. Replace during major overhauls.

Cylinder Cover (Item 16 – Purchase No. ZQ25-139, Part No. ZQ25.2-8, quantity 2): Two cylinder covers seal the cylinder ends and retain the pistons. Inspect for cracks or thread damage.

O-ring 22×2.4 (Item 17 – Purchase No. ZQ25-142, Part No. GB1235, quantity 4): Four O‑rings providing sealing around pistons or adaptors. Always replace all O‑rings during overhaul.

Hose Adaptor 10II-1400 (Item 18 – Purchase No. ZQ25-144, Part No. JB/ZQ4427, quantity 2): Two hose adaptors connecting hydraulic hoses to the oil passage bolts. Inspect threads and sealing surfaces.

Oil Passage Bolt (1) (Item 19 – Purchase No. ZQ25-143, Part No. XYQ3C.B-21(1), quantity 2): Two oil passage bolts direct hydraulic oil into the cylinder chambers. They contain internal passages for oil flow. Inspect for blockage or thread damage.

Backup Tong Tail Assembly Operation

  1. Hydraulic oil enters through the oil passage bolts (Item 19) via hose adaptors (Item 18).

  2. Oil flows into the cylinder sleeve (Item 9) and acts on the pistons (Item 14).

  3. The rack plunger (Item 10) moves linearly.

  4. The rack teeth engage the duplex gear (Item 4).

  5. The duplex gear rotates the shaft (Item 1), transmitting motion to the backup tong jaw mechanism.

  6. O‑rings (Items 3, 7, 17) maintain hydraulic pressure.

  7. The gear cover (Item 2) protects the internal components.

Maintenance and Inspection Points

  • Inspect the cylinder sleeve bore for scoring – replace if damaged.

  • Check the rack plunger teeth for wear – replace if worn.

  • Inspect the duplex gear for tooth wear or pitting.

  • Verify pistons move smoothly without binding.

  • Replace all O‑rings and seals during overhaul.

  • Inspect hose adaptors for thread damage or leaks.

  • Check all fasteners for tightness – torque to specification.

Ordering and Replacement Guidance

When ordering components for the backup tong tail assembly, always reference both the Purchase No. and Part No. The rack plunger (ZQ25-157) and duplex gear (ZQ25-149) are the primary working components. All O‑rings (Items 3, 7, 17) should be replaced during every major overhaul.

For assistance with part identification, assembly guidance, or to place an order for any ZQ127/25Y TEDA backup tong tail assembly component, please contact us via email at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit