ZQ127/25Y TEDA Drill Pipe Power Tong – Backup Tong Head Assembly Components

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The ZQ127/25Y TEDA Backup Tong Head Assembly comprises 29 component types forming the complete gripping head of the backup tong. Key parts include the Main Body, Cover Board, Jaw Set Bracket, Ramp Plates, Die Seats (1-6) with Dies (2-3), Jaw Sets, Rollers with Roller Shafts, Centralizing Shaft with Roller, Knob with Shaft, Steel Balls, Springs, Stop Pin, Screw Stop Pins, and various fastening hardware. This assembly provides the counter‑torque gripping function for drill pipe, tubing, and casing operations.

Conatct For Details
DetailReview(0)Additional

The backup tong head assembly is the gripping unit of the backup tong, providing the counter‑torque necessary to hold the lower pipe connection stationary while the master tong applies rotational force during make‑up and break‑out operations. The backup tong head features the same inner curved roller climbing clamping mechanism as the master tong, ensuring reliable gripping in both directions. This comprehensive assembly consists of 29 component types that work together to deliver reliable clamping, smooth resetting, and proper alignment.

Hexagon Socket Head Cap Screw M10×30 (Item 1 – Purchase No. ZQ25-192, Part No. GB70, quantity 12): Twelve socket head cap screws securing the backup tong head components. Torque to specification.

Cover Board (Item 2 – Purchase No. ZQ25-146A, Part No. ZQ25.2-10A, quantity 1): The cover board encloses and protects the internal components of the backup tong head. It prevents debris ingress and retains lubrication. Inspect for cracks or sealing surface damage.

Roller Shaft (Item 3 – Purchase No. ZQ25-62, Part No. ZQ25.1.1-6, quantity 2): Two roller shafts that support the rollers. They provide pivot points for the rollers during the climbing action. Inspect for scoring or wear – replace if damaged.

Slotted Cone End Fastening Screw M8×10 (Item 4 – Purchase No. ZQ25-63, Part No. GB71, quantity 4): Four slotted cone end fastening screws securing the roller and jaw components. Torque to specification.

Die (2-3) (Item 5 – Purchase No. ZQ25-65, Part No. XYQ12.Z-01.12(2-3), quantity 4 each): Dies providing the gripping teeth that directly contact the pipe. Two die types are available:

  • Die (2): Steel mark 89-114 for 2-3/8" to 3-1/2" drill pipe and 3-1/2" to 4-1/2" tubing

  • Die (3): Steel mark 121-156 for 3-1/2" drill pipe and 5" to 5-1/2" casing

Replace dies when the gripping teeth become blunt, chipped, or worn. Always replace dies in matched sets.

Die Seat (1-6) (Item 6 – Purchase No. ZQ25-64, Part No. ZQ25.1.1-7(1-6), quantity 2 each): Six die seat types are available:

  • Die Seat (1): For 2-3/8" drill pipe and 3-1/2" tubing

  • Die Seat (2): For 2-7/8" drill pipe and 4" tubing

  • Die Seat (3): For 4-1/2" tubing and couplings

  • Die Seat (4): For 3-1/2" drill pipe and 5" casing

  • Die Seat (5): For 5-1/2" casing

  • Die Seat (6): For 5-1/2" casing coupling

Select the correct die seat based on the pipe size.

Jaw Set (Item 7 – Purchase No. ZQ25-59, Part No. ZQ25.1.1-4, quantity 2): Two jaw sets that hold the dies and provide the gripping surface. They are the structural carriers for the gripping teeth. Inspect for wear or deformation.

Roller (Item 8 – Purchase No. ZQ25-61, Part No. ZQ25.1.1-5, quantity 2): Two rollers that travel along the ramp plates during clamping. They reduce friction and enable the climbing action. Inspect for flat spots or scoring – replace if worn.

Cylindrical Pin 6×18 (Item 9 – Purchase No. ZQ25-60, Part No. GB119, quantity 9): Nine cylindrical pins providing precise locating and alignment of components within the backup tong head assembly. Inspect for wear or bending.

Set Screw (Item 10 – Purchase No. ZQ25-67, Part No. XYQ12.B-10, quantity 2): Two set screws securing the die and jaw components. Torque to specification.

Jaw Set Bracket (Item 11 – Purchase No. ZQ25-131A, Part No. ZQ25.2-4A, quantity 1): The jaw set bracket is the structural carrier for the jaw sets, ramp plates, and rollers. It is mounted within the backup head body and supports the jaw mechanism. Inspect for wear or deformation.

Ramp (Item 12 – Purchase No. ZQ25-130, Part No. ZQ25.2-3A, quantity 4): Four ramp plates that provide the curved surfaces driving the clamping action. As the jaw mechanism moves, the rollers climb the ramp plates, moving the jaws toward the center. Inspect ramp surfaces for wear or scoring.

Main Body (Item 13 – Purchase No. ZQ25-129A, Part No. ZQ25.2-2C, quantity 1): The main body is the primary structural housing of the backup tong head. It provides the foundation for the jaw set bracket, ramp plates, and reset mechanism. Inspect for cracks, deformation, or wear.

Fore Support Seat (Item 14 – Purchase No. ZQ25-128A, Part No. ZQ25.2-1B, quantity 2): Two fore support seats providing structural support and mounting points at the front of the backup tong head. Inspect for cracks or wear.

Spring Washer 12 (Item 15 – Purchase No. ZQ25-188, Part No. GB/T93, quantity 26): Twenty-six spring washers providing locking action for M12 fasteners. Replace if flattened.

Hexagon Socket Head Cap Screw M12×40 (Item 16 – Purchase No. ZQ25-189, Part No. GB/T70, quantity 4): Four socket head cap screws securing the backup tong head components. Torque to specification.

Centralizing Shaft (Item 17 – Purchase No. ZQ25-190, Part No. ZQ25.2-18, quantity 1): The centralizing shaft supports the centralizing roller and ensures proper centering of the backup tong head. Inspect for scoring or wear.

Hexagon Socket Head Cap Screw M12×25 (Item 18 – Purchase No. ZQ25-7, Part No. GB/T70, quantity 20): Twenty socket head cap screws securing the backup tong head components. Torque to specification.

Ordinary Parallel Key 16×50 (Item 19 – Purchase No. ZQ25-136, Part No. GB1096, quantity 1): A parallel key securing components within the backup tong head. Inspect the key and keyway for wear – replace if damaged.

Centralizing Roller (Item 20 – Purchase No. ZQ25-191, Part No. ZQ25.2-19, quantity 1): The centralizing roller guides and centres the backup tong head within the assembly. Inspect for flat spots or wear – replace if damaged.

Screw Stop Pin (Item 21 – Purchase No. ZQ25-66, Part No. ZQ25.1.1-8, quantity 24): Twenty-four screw stop pins securing the die seats and dies in position. Inspect for wear or bending.

Stop Pin (Item 22 – Purchase No. ZQ25-132A, Part No. ZQ25.2-5A, quantity 1): A stop pin that limits the travel of the jaw mechanism, preventing over‑travel and ensuring proper jaw positioning. Inspect for wear or damage.

Spring Washer 6 (Item 23 – Purchase No. ZQ25-193, Part No. GB/T93, quantity 5): Five spring washers providing locking action for M6 fasteners. Replace if flattened.

Hexagon Socket Head Cap Screw M6×25 (Item 24 – Purchase No. ZQ25-152, Part No. GB70, quantity 5): Five socket head cap screws securing the backup tong head components. Torque to specification.

Knob Shaft (Item 25 – Purchase No. ZQ25-183, Part No. ZQ25.1.8-4, quantity 1): The knob shaft transmits the rotational movement from the reset knob to the resetting mechanism. It must move smoothly without binding. Inspect for scoring or wear.

Steel Ball Φ5 (Item 26 – Purchase No. ZQ25-186, Part No. GB308, quantity 2): Two steel balls that are part of the detent mechanism for the reset knob. They engage with detent grooves to hold the reset knob in position. The balls should be smooth and free from flat spots.

Spring (Item 27 – Purchase No. ZQ25-185, Part No. XYQ3C.B-10, quantity 2): Two springs that provide detent force for the reset knob mechanism. They work with the steel balls to hold the reset knob in position. Replace if weak or corroded.

Knob (Item 28 – Purchase No. ZQ25-184, Part No. ZQ25.1.8-5A, quantity 1): The knob is the operator interface for resetting the backup head to its initial working position. Turning the knob changes the direction of the clamping mechanism for make‑up or break‑out operations.

Cylindrical Pin 5×25 (Item 29 – Purchase No. ZQ25-187, Part No. GB119, quantity 1): A cylindrical pin providing precise locating and alignment of the reset mechanism components. Inspect for wear or bending.

Backup Tong Head Operation

  1. Hydraulic pressure from the backup tong tail actuates the jaw set bracket (Item 11).

  2. The jaw set bracket moves the jaw sets (Item 7) toward the center.

  3. Rollers (Item 8) climb the ramp plates (Item 12), creating clamping force.

  4. The dies (Item 5) grip the pipe connection.

  5. The backup head holds the pipe stationary.

  6. The master tong rotates the pipe for make‑up or break‑out.

  7. Springs (Item 27) return the jaws to the open position when pressure is released.

  8. The knob (Item 28) realigns the backup head for the next operation.

  9. The centralizing roller (Item 20) maintains proper centering.

Maintenance and Inspection Points

  • Inspect dies for wear – replace if blunt or chipped.

  • Check ramp plates for wear or scoring – replace if damaged.

  • Inspect rollers for flat spots or scoring – replace if worn.

  • Verify the knob mechanism operates smoothly.

  • Check springs for tension – replace if weak or corroded.

  • Inspect all fasteners for tightness – torque to specification.

  • Verify the backup head opens and closes smoothly.

  • Inspect the main body for cracks or deformation.

Ordering and Replacement Guidance

When ordering components for the backup tong head assembly, always reference both the Purchase No. and Part No. to ensure correct specification. Dies (ZQ25-65) and die seats (ZQ25-64) are the most frequently replaced items – select the correct size for your pipe range. Ramp plates (ZQ25-130) and rollers (ZQ25-61) should be inspected for wear regularly. Springs (ZQ25-185) should be replaced if weak.

For assistance with part identification, assembly guidance, or to place an order for any ZQ127/25Y TEDA backup tong head component, please contact us via email at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit