ZQ127/25Y TEDA Drill Pipe Power Tong – Shifting Mechanism Components

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The ZQ127/25Y TEDA Shifting Mechanism comprises 17 component types that form the complete gear shift system of the master tong. Key parts include 2 Shaft Sleeves, Roller Shaft, Roller, Roller Support Seat, Flat Key, Shim, 2 Bolt Shafts, 2 Deep Groove Ball Bearings 100, Washers, Fork, Fork Shaft, Operating Handle Assembly, Handle, and various fastening hardware. This assembly enables gear selection between high and low speed operation, with shifting performed at low speed to avoid gear damage.

Conatct For Details
DetailReview(0)Additional

The shifting mechanism is the operator interface for selecting between high‑gear and low‑gear operation on the ZQ127/25Y TEDA master tong. This assembly translates manual input into axial movement of the shifting fork, engaging the appropriate gear stage for the required speed and torque. Reliable shifting is essential for operational efficiency and preventing gear clash that could damage the transmission. Regular inspection and maintenance of this mechanism ensure smooth, positive gear engagement.

Shaft Sleeve (Item 1 – Purchase No. ZQ25-101, Part No. XYQ12.Z-19.01, quantity 2): Two shaft sleeves provide bearing surfaces for the fork shaft. They reduce friction and wear between the shaft and the housing. Inspect for scoring or wear – replace if damaged.

Roller Shaft (Item 2 – Purchase No. ZQ25-104, Part No. XYQ3C.Z.6-4, quantity 1): The roller shaft supports the roller within the shifting mechanism. It provides the pivot point for the roller and ensures smooth operation. Inspect for scoring or wear – replace if damaged.

Cotter Pin 2×10 (Item 3 – Purchase No. ZQ25-105, Part No. GB91, quantity 1): A cotter pin securing the roller shaft in position. Always use new cotter pins during reassembly and bend the legs securely to prevent loosening under vibration.

Roller (Item 4 – Purchase No. ZQ25-103, Part No. XYQ3C.Z.6-3, quantity 1): The roller provides smooth movement and reduces friction during gear shifting. It rotates on the roller shaft and works with the roller support seat to ensure reliable shift fork operation. Inspect for flat spots or scoring – replace if damaged.

Roller Support Seat (Item 5 – Purchase No. ZQ25-106, Part No. XYQ3C.Z.6-5, quantity 1): The roller support seat provides the mounting interface for the roller and roller shaft within the shifting mechanism. It ensures proper alignment and positioning of the roller assembly. Inspect for cracks or wear – replace if damaged.

Flat Key 6×6×40 (Item 6 – Purchase No. ZQ25-107, Part No. GB1096, quantity 1): A flat key that secures the fork or other components to the fork shaft. It prevents relative rotation while allowing axial movement. Inspect the key and keyway for wear – replace if damaged.

Shim (Item 7 – Purchase No. ZQ25-109, Part No. ZQ25.1.6-2, quantity 1): The shim adjusts axial clearance within the shifting mechanism, ensuring correct preload and smooth operation. Use only the specified shim thickness.

Hexagon Socket Head Cap Screw M6×10 (Item 8 – Purchase No. ZQ25-87, Part No. GB70, quantity 1): A socket head cap screw securing the shifting mechanism components. Torque to specification.

Bolt Shaft (Item 9 – Purchase No. ZQ25-112, Part No. XYQ12.Z-19.04, quantity 2): Two bolt shafts that provide mounting points and pivot axes for the gear shifting mechanism. Inspect for wear or bending – replace if damaged.

Deep Groove Ball Bearing 100 (Item 10 – Purchase No. ZQ25-114, Part No. GB276, quantity 2): Two deep groove ball bearings supporting the fork shaft. They provide smooth rotation with minimal friction. Check for roughness, noise, or play – replace if worn. Use only genuine bearings.

Washer 10 (Item 11 – Purchase No. ZQ25-113, Part No. GB848, quantity 2 and Item 13 – Purchase No. ZQ25-111, Part No. GB93, quantity 2): Four washers providing bearing surfaces and load distribution for the fastening system. Inspect for deformation – replace if damaged.

Fork (Item 12 – Purchase No. ZQ25-102, Part No. XYQ12.Z-19.02, quantity 1): The fork is the primary component that engages with the shifting gear in the transmission. It moves axially along the fork shaft to select the correct gear position. The fork tips contact the gear groove and must be inspected for wear – worn fork tips can cause incomplete gear engagement and gear clash.

Nut M10 (Item 14 – Purchase No. ZQ25-110, Part No. GB6170, quantity 2): Two hexagon nuts securing the shifting mechanism components. Torque to specification.

Fork Shaft (Item 15 – Purchase No. ZQ25-108, Part No. ZQ25.1.6-1, quantity 1): The fork shaft transmits movement from the operating handle to the fork. It must move smoothly without binding. The shaft provides the axial guidance for the fork. Inspect for scoring or wear on bearing surfaces – replace if damaged.

Operating Handle Assembly (Item 16 – Purchase No. ZQ25-115, Part No. ZQ25.1.6.1, quantity 1): The operating handle assembly is the operator's control interface for gear shifting. It provides mechanical advantage to move the fork. The assembly must move freely through the full shift range without binding. Inspect for loose connections or worn pivot points.

Handle (Item 17 – Purchase No. ZQ25-205, Part No. XYQ3C.Z.5-10, quantity 1): The handle is the grip point for the operator. It provides comfortable and secure operation during gear selection. Inspect for secure attachment.

Shifting Mechanism Operation

  1. The operator moves the handle (Item 17) connected to the operating handle assembly (Item 16).

  2. Movement is transmitted to the fork shaft (Item 15).

  3. The fork (Item 12) moves axially along the fork shaft.

  4. The fork engages with the shifting gear groove.

  5. Deep groove ball bearings (Item 10) provide smooth rotation.

  6. The roller (Item 4) and roller support seat (Item 5) ensure smooth movement.

  7. The selected gear is engaged.

Gear Selection

The ZQ127/25Y offers two speeds through gear engagement:

  • High Gear: For spinning operations at 43 RPM

  • Low Gear: For high‑torque make‑up and break‑out at 8 RPM

Maintenance and Inspection Points

  • Inspect the fork tips for wear – worn tips cause gear clash and incomplete engagement.

  • Check the fork shaft for scoring or wear – must move smoothly without binding.

  • Verify the roller moves freely on the roller shaft – clean and lubricate as needed.

  • Inspect shaft sleeves for wear – replace if scored or worn.

  • Check deep groove ball bearings 100 for roughness, noise, or play – replace if worn.

  • Verify the handle and operating handle assembly are securely attached.

  • Inspect the cotter pin for proper installation – use new pins during reassembly.

  • Check the flat key for wear or deformation – replace if damaged.

  • Lubricate all moving parts as recommended in the maintenance section.

Ordering and Replacement Guidance

When ordering components for the shifting mechanism, always reference both the Purchase No. and Part No. to ensure correct specification. The fork (ZQ25-102) and fork shaft (ZQ25-108) are the primary working components. The roller (ZQ25-103) and shaft sleeves (ZQ25-101) should be inspected for wear regularly. Bearings 100 (ZQ25-114) are critical precision components – use only genuine parts. The flat key (ZQ25-107) should be replaced during major overhauls.

For assistance with part identification, assembly guidance, or to place an order for any ZQ127/25Y TEDA shifting mechanism component, please contact us via email at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit