The master tong is the primary active unit of the ZQ127/25Y TEDA Drill Pipe Power Tong, responsible for gripping the pipe and rotating it clockwise or counter‑clockwise to complete make‑up or break‑out operations. This comprehensive assembly consists of six major component groups that work together to deliver reliable torque transmission, precise gripping, and safe operation. Each component is identified by its purchase number and part number for accurate ordering and replacement.
Complete Master Tong Assembly Parts Inventory
Shell Assembly and Parts (Item 1, quantity 1): The shell assembly is the main structural housing that encloses and protects all internal components of the master tong. It provides the structural foundation for mounting the tong head, hydraulic motor, control valves, and transmission components. The shell is fabricated from high-strength materials to withstand the loads encountered during well workover operations. Inspect for cracks, deformation, or corrosion – replace if damaged.
Tong Head Assembly and Brake Mechanism (Item 2, quantity 1): The tong head assembly is the core gripping unit of the master tong. It houses the jaw mechanism with die holders, ramp plates, rollers, and the open gear that transmits torque to the jaws. The integrated brake mechanism provides controlled braking force to ensure proper jaw cam action and secure gripping. The brake mechanism includes brake plates, friction discs, and springs for adjustable braking torque. Inspect the tong head for die wear, ramp scoring, and brake component condition regularly.
Hydraulic Motor J6K-625 (Item 3 – Purchase No. ZQ25-30, quantity 1): The J6K-625 hydraulic motor is a high‑torque, low‑speed motor that converts hydraulic power into rotational mechanical power. It provides the primary drive force for the master tong, delivering the necessary torque for both high‑speed spinning and low‑speed make‑up and break‑out operations. The motor is directly coupled to the drive gear assembly for efficient power transmission. Inspect for hydraulic leaks, unusual noise, or reduced performance – replace if necessary.
Hand Control Valve and Lift Valve (Item 4, quantity 1): The hand control valve is the primary operator interface for controlling the master tong's direction and speed. It allows the operator to select make‑up or break‑out operations with proportional speed control. The lift valve controls the hydraulic lifting bucket, enabling precise height adjustment of the power tong. The valves include internal valve cores, springs, and seals for reliable operation. Inspect for smooth operation and hydraulic leaks – replace seals during major overhauls.
Drive Gear Assembly and Parts (Item 5, quantity 1): The drive gear assembly is the complete transmission system that transfers power from the hydraulic motor to the tong head. It includes the duplex gears, idle gears, shifting gears, shafts, bearings, and all associated hardware. The drive gear assembly provides the two‑speed reduction that delivers high speed for spinning (43 RPM) and low speed for high‑torque make‑up and break‑out (8 RPM). Inspect gear teeth for wear, pitting, or chipping – replace damaged gears.
Shift Mechanism Assembly (Item 6, quantity 1): The shift mechanism assembly enables the operator to select between high gear and low gear operation. It includes the shift fork, shift fork shaft, shifting ring, roller, roller support seat, and associated hardware. The shift mechanism translates manual movement into axial movement of the shifting gear, engaging the correct gear stage. Shifting must be carried out at low speed to avoid damaging the gears. Inspect shift fork tips for wear – worn tips cause gear clash and incomplete engagement.
Assembly Interconnection
The six major components interconnect as follows:
The shell assembly provides the structural foundation for the entire master tong.
The tong head assembly is mounted within the shell and driven by the drive gear assembly.
The brake mechanism works with the tong head assembly to provide controlled gripping.
The hydraulic motor J6K-625 mounts to the shell and connects to the drive gear assembly.
The hand control valve and lift valve mount to the shell and connect to the hydraulic motor and bucket.
The drive gear assembly receives power from the motor and transmits it to the tong head.
The shift mechanism assembly provides operator gear selection.
Ordering and Replacement Guidance
When ordering components for the master tong, always reference both the Purchase No. and Part No. to ensure correct specification. The hydraulic motor J6K-625 (ZQ25-30) is a critical precision component – use only genuine parts. The tong head assembly and brake mechanism are the primary working components and should be inspected regularly. All seals and O‑rings should be replaced during major overhauls.
For assistance with part identification, assembly guidance, or to place an order for any ZQ127/25Y TEDA master tong component, please contact us via email at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.