The shell assembly is the complete structural housing and supporting framework of the ZQ127/25Y TEDA master tong. It provides the foundation for mounting all internal components, the safety door system, the suspension system, and the operator control interfaces. This comprehensive assembly consists of 33 component types including structural castings, covers, fasteners, seals, and identification plates that work together to provide reliable operation in demanding well workover conditions.
Safety Door Components
The safety door system provides operator protection by enclosing the tong head during operation. Key components include the Main Body of Safety Door (Item 6 – ZQ25.1.9.1), Safety Door Shaft (Item 3 – ZQ25.1.9-1), Tension Spring (Item 5 – Φ17×95), and Cotter Pin 5×35 (Item 4 – GB91) for securing the shaft. The safety door must be securely closed before the tong can operate, protecting operating personnel from moving parts. Inspect the door body for cracks, check spring tension, and verify smooth operation regularly.
Structural Components
The Tong Body (Item 9 – ZQ25.1-2) is the main structural casting that encloses and protects all internal components. The Tong Head Cover (Item 8 – ZQ25.1.8-1) seals the upper portion of the tong head, protecting internal components from contamination. The Bearing Cover (Item 32 – ZQ25.1.5-8) encloses and protects the bearing assembly. These structural components are designed to withstand the loads encountered during drill pipe, tubing, and casing operations.
Suspension and Hanging Components
The suspension system connects the master tong to the hydraulic bucket and rig hoisting system. The Hanging Rod (Item 17 – ZQ25.1.7) is the primary structural connection, supported by two Hanging Caputs (Item 19 – ZQ25.1.7-1A), two Hanging Seats (Item 23 – ZQ25.1-13A), and two Hanging Pin Shafts (Item 21 – ZQ25.1-16). Cotter Pins 4×30 (Item 20 – GB91) secure the pin shafts. Hexagon Socket Head Cap Screws M12×100 (Item 18 – GB70) secure the hanging assembly. Two Parallel Keys 12×40 (Item 29 – GB1096) provide additional securing. This assembly enables proper suspension, leveling, and height adjustment.
Handle and Operator Interface Components
Operator control and positioning interfaces include the Fore Handle (RH) (Item 10 – XYQ3C.Z.3), Fore Handle (LH) (Item 24 – XYQ3C.Z.4), and two Back Handles (Item 25 – XYQ3C.Z-37). Two Fore Support Seats (Item 11 – ZQ25.1-1) provide structural support for the front handles. These handles allow operators to safely maneuver and position the tong during well workover operations.
Guide and Positioning Components
The Back Guide Rod Seat (Item 28 – ZQ25.1-4) provides the mounting interface for the back guide pole assembly. The Locating Block (Item 31 – XYQ12.Z.1-21) ensures proper alignment of components. The Spring (Item 30 – XYQ3C.Z-21) provides tension or positioning force within the assembly. A Tail Guy Pin (Item 26 – XYQ12.Z-62) provides the attachment point for the back guy (safety line), secured by a Cotter Pin 5×35 (Item 27 – GB91).
Lubrication and Identification Components
Two Oil Cups M10×1 (Item 22 – GB1152) provide lubrication access to the shell assembly pivot points. The Name Plate (Item 16 – ZQ25.1-14A) displays the model number, serial number, and key specifications, and must be kept legible for proper identification. A Pin Shaft (Item 7 – ZQ25.1.8-6) provides additional securing within the assembly.
Fastening Hardware
A comprehensive set of fasteners secures all components:
Hexagon Socket Head Cap Screws M10×25 (Item 1 – GB70, quantity 29)
Washers 10 (Item 2 – GB93, quantity 23)
Hexagon Socket Head Cap Screws M12×25 (Item 12 – GB70, quantity 4)
Washers 12 (Item 13 – GB93, quantity 4)
Hex Head Bolts M10×20 (Item 14 – GB5781, quantity 6)
Slotted Cylinder Head Screws M6×10 (Item 15 – GB65-85, quantity 12)
Hexagon Socket Head Cap Screws M8×25 (Item 33 – GB70, quantity 6)
Assembly Interconnection
The shell assembly components interconnect as follows:
The tong body provides the structural foundation for the entire master tong.
The safety door system mounts to the front of the tong body for operator protection.
The tong head cover seals the upper portion of the tong head.
The hanging system connects the tong to the hydraulic bucket and hoisting system.
Fore and back handles provide operator control and positioning.
The back guide rod seat provides mounting for the rear guide pole.
The tail guy pin provides the back guy attachment point.
Oil cups provide lubrication access to pivot points.
The name plate provides identification.
Fasteners secure all components.
Maintenance and Inspection Points
Inspect the tong body for cracks, deformation, or corrosion – replace if damaged.
Check the safety door for secure latching and smooth operation.
Inspect the hanging rod and hanging seats for wear or damage.
Verify handles are securely attached – tighten as needed.
Inspect the tail guy pin for wear or bending – replace if damaged.
Lubricate pivot points through oil cups regularly.
Verify the name plate is legible – replace if damaged.
Inspect all fasteners for tightness – torque to specification.
Ordering and Replacement Guidance
When ordering components for the shell assembly, always reference both the Purchase No. and Part No. to ensure correct specification. The tong body (ZQ25-12) is the primary structural component. The safety door body (ZQ25-125) and safety door shaft (ZQ25-126) are critical safety components. The hanging rod (ZQ25-48) should be inspected regularly. All fasteners should be replaced during major overhauls.
For assistance with part identification, assembly guidance, or to place an order for any ZQ127/25Y TEDA shell assembly component, please contact us via email at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.