The tong head assembly is the core gripping and rotating unit of the ZQ127/25Y TEDA master tong. It houses the inner curved roller climbing clamping mechanism that provides reliable gripping of drill pipe, tubing, and casing in both make‑up and break‑out directions. This comprehensive assembly consists of 16 component types that work together to deliver secure clamping, precise rotation, and smooth operation.
Structural Components
The Main Body (Item 7 – ZQ25.1.1-1, quantity 1) is the central housing of the tong head, providing the structural foundation for all gripping and rotating components. It is precision‑machined to tight tolerances for proper alignment and operation. The Jaw Set Bracket (Item 4 – ZQ25.1.1-3, quantity 1) is the structural carrier for the jaw sets, ramp plates, and dies. It is fixed to the inner side of the open gear and supports the jaw mechanism during clamping. The Open Gear (Item 3 – ZQ25.1.1-8, quantity 1) is the primary drive gear that transmits rotational force from the transmission to the tong head. It engages with the drive gear train to rotate the tong head during make‑up and break‑out operations. Inspect gear teeth for wear or pitting regularly.
Clamping Mechanism Components
The clamping mechanism uses inner curved roller climbing action for reliable gripping. Ramp Plates (Item 5 – ZQ25.1.1-2, quantity 4) provide the curved surfaces that drive the clamping action. As the open gear rotates and the jaw set bracket is braked, the ramp plates move relative to the rollers, causing the rollers to climb and move the jaws toward the center. Inspect ramp surfaces for wear or scoring – replace if damaged. Two Roller Shafts (Item 10 – ZQ25.1.1-6, quantity 2) support the rollers and provide pivot points during the climbing action. Two Rollers (Item 13 – ZQ25.1.1-5, quantity 2) travel along the ramp plates during clamping, reducing friction and enabling the climbing action. Inspect for flat spots or scoring – replace if worn. Slotted Cone End Fastening Screws M8×10 (Item 11 – GB71, quantity 4) secure the roller components.
Die and Die Seat Components
Die Seats (1-5) (Item 9 – ZQ25.1.1-7(1-5), quantity 2 each) provide the structural carriers for the dies. Five die seat types are available, each with specific application ranges:
Die Seat (1): For 2-3/8" drill pipe and 3-1/2" tubing
Die Seat (2): For 2-7/8" drill pipe and 4" tubing
Die Seat (3): For 4-1/2" tubing and couplings
Die Seat (4): For 3-1/2" drill pipe and 5" casing
Die Seat (5): For 5-1/2" casing
Dies (2-3) (Item 8 – XYQ12.Z-01.12(2-3), quantity 4 each) provide the gripping teeth that directly contact the pipe. Two die types are available:
Die (2): Steel mark 89-114 for 2-3/8" to 3-1/2" drill pipe and 3-1/2" to 4-1/2" tubing
Die (3): Steel mark 121-156 for 3-1/2" drill pipe and 5" to 5-1/2" casing
Replace dies when the gripping teeth become blunt, chipped, or worn. Always replace dies in matched sets.
Jaw and Retaining Components
Jaw Sets (Item 12 – ZQ25.1.1-4, quantity 2) are the structural carriers that hold the dies and provide the gripping surface. The Retainer Pin (Item 1 – ZQ25.1.1-9, quantity 1) secures the jaw components in position. Screw Retainer Pins (Item 15 – XYQ12.Z-01.11, quantity 20) secure the die seats and dies in position within the jaw set. Set Screws (Item 16 – XYQ12.B-10, quantity 2) provide additional securing for the components. Cylindrical Pins 6×18 (Item 14 – GB119, quantity 4) provide precise locating and alignment of components within the tong head assembly.
Fastening Hardware
Hexagon socket head cap screws secure various tong head assembly components:
M12×30 (Item 2 – GB70, quantity 30)
M12×25 (Item 6 – GB70, quantity 12)
Tong Head Assembly Operation
The open gear (Item 3) receives power from the transmission.
The jaw set bracket (Item 4) is held stationary by the braking mechanism.
The ramp plates (Item 5) move with the open gear, causing rollers (Item 13) to climb.
The jaw sets (Item 12) move toward the center, clamping the pipe.
The open gear continues rotating, turning the gripped pipe.
The die seats (Item 9) and dies (Item 8) provide the gripping surface.
Retainer pins (Items 1 and 15) and set screws (Item 16) secure all components.
Maintenance and Inspection Points
Inspect dies (2-3) for wear – replace if blunt or chipped.
Check ramp plates for wear or scoring – replace if damaged.
Inspect rollers for flat spots or scoring – replace if worn.
Inspect the open gear for tooth wear or pitting.
Verify all fasteners are tight – torque to specification.
Check retainer pins and set screws for wear or bending.
Inspect the jaw set bracket for cracks or deformation.
Ordering and Replacement Guidance
When ordering components for the tong head assembly, always reference both the Purchase No. and Part No. to ensure correct specification. Dies (XYQ12.Z-01.12) and die seats (ZQ25.1.1-7) are the most frequently replaced items – select the correct size and steel mark for your pipe range. Ramp plates (ZQ25.1.1-2) and rollers (ZQ25.1.1-5) should be inspected for wear regularly.
For assistance with part identification, assembly guidance, or to place an order for any ZQ127/25Y TEDA tong head component, please contact us via email at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.