The tong head brake mechanism is a critical safety and functional system of the ZQ127/25Y TEDA master tong that controls the rotation of the tong head, allowing the operator to start, stop, and hold the gripping position precisely. This multi‑disc friction brake system ensures smooth engagement and disengagement, preventing sudden movements that could damage pipe threads or compromise operator safety. Regular inspection and timely replacement of brake components are essential for reliable tong operation.
Brake System Components
The brake system provides the adjustable frictional resistance necessary for proper jaw cam action. Eleven Brake Bolts (Item 1 – ZQ25.1.8-9, quantity 11) and eleven matching Brake Springs (Item 2 – ZQ25.1.8-8, quantity 11) form the actuation mechanism of the friction brake. When the knob is turned, the brake bolts compress the springs, applying pressure to the friction disc stack. The springs ensure even pressure distribution across the braking surface. Inspect springs for loss of tension and bolts for thread wear – replace if damaged.
Three Friction Discs (Item 3 – ZQ25.1.8-2, quantity 3) are the primary wear elements in the brake system. They provide the frictional resistance that holds the tong head in position. These discs are sandwiched between the brake steel plate and brake disc. When the friction material becomes worn or glazed, braking performance degrades – replace all three discs as a matched set.
The Brake Steel Plate (Item 6 – ZQ25.1.8-3, quantity 1) and Brake Disc (Item 11 – ZQ25.1.8-7, quantity 1) form the fixed and rotating members of the brake pack. The brake steel plate is stationary, while the brake disc rotates with the tong head. The friction discs are compressed between them to generate braking torque. Both plates must be flat and free from scoring; resurface or replace if warped or grooved.
Control and Resetting Components
The Knob (Item 13 – ZQ25.1.8-5, quantity 1) and Knob Shaft (Item 7 – ZQ25.1.8-4, quantity 1) provide the operator interface for engaging and releasing the brake. Turning the knob rotates the shaft, which moves the brake bolts to compress or release the spring pack. The knob shaft transmits this rotary motion through the tong head cover. Check for spline wear and smooth rotation. A Pin Shaft (Item 16 – ZQ25.1.8-6, quantity 1) provides additional securing within the mechanism. A Shim (Item 5 – ZQ25.1.6-2, quantity 1) adjusts the axial clearance within the brake pack, ensuring correct preload when the brake is disengaged. Correct shim thickness is critical – use only the specified shim.
Centralizing Components
Twenty-one Centralizing Rollers (Item 8 – XYQ12.Z-03, quantity 21) with twenty-one matching Centralizing Roller Shafts (Item 9 – ZQ25.1-3, quantity 21) keep the tong head centred within the shell during rotation. They reduce friction and maintain concentric alignment between the tong head and the housing. Worn or flat‑spotted rollers cause vibration and uneven brake loading; replace in sets when worn.
Housing and Cover Components
The Tong Head Cover (Item 10 – ZQ25.1.8-1, quantity 1) seals the brake mechanism and provides the mounting surface for the knob shaft and brake components. It protects the internal brake parts from contamination. Two Back Handles (Item 15 – XYQ3C.Z-37, quantity 2) provide operator control and positioning for the tong head.
Fastening Hardware
Slotted Countersunk Screws M5×10 (Item 4 – GB68, quantity 63): Secure friction linings and brake components.
Hexagon Socket Head Cap Screw M6×10 (Item 12 – GB70, quantity 1)
Hexagon Socket Head Cap Screws M10×25 (Item 14 – GB70, quantity 4): Secure the tong head cover.
Brake System Operation
The operator turns the knob (Item 13), rotating the knob shaft (Item 7).
The brake bolts (Item 1) compress the brake springs (Item 2).
The springs apply pressure to the friction discs (Item 3) between the brake steel plate (Item 6) and brake disc (Item 11).
Frictional resistance holds the tong head in position or allows controlled rotation.
Centralizing rollers (Item 8) maintain concentric alignment.
The shim (Item 5) maintains proper preload.
The tong head cover (Item 10) protects internal components.
Maintenance and Inspection Points
Inspect friction discs regularly – replace when worn below minimum specification. Always replace all three discs simultaneously.
Check brake springs for loss of tension – springs should be free from cracks and corrosion.
Lubricate the knob shaft to ensure smooth engagement.
Inspect centralizing rollers for flat spots or wear – replace as sets.
Verify shim thickness for correct brake preload.
Check the brake steel plate and brake disc for flatness and scoring.
Inspect all fasteners for tightness – torque to specification.
Ordering and Replacement Guidance
When ordering components for the tong head brake mechanism, always reference both the Purchase No. and Part No. to ensure correct specification. Friction discs (ZQ25-117) are the primary wear components and should be available as spares. Brake springs (ZQ25-123) should be replaced if weak. Centralizing rollers (ZQ25-14) and roller shafts (ZQ25-13) should be inspected regularly.
For assistance with part identification, assembly guidance, or to place an order for any ZQ127/25Y TEDA tong head brake mechanism component, please contact us via email at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.