The 110103-500 Upper IBOP is a common inner blowout preventer that directly fits four popular Varco top drive models: TDS-4SA, TDS-8SA, TDS-10SA, and TDS-11SA. This cross-model compatibility eliminates the need to stock different upper IBOPs for different rigs.
Whether your fleet operates light TDS-4SA units for workover or heavy TDS-11SA for deep drilling, the same 110103-500 can be used across all of them.
| Parameter | Value |
|---|---|
| Part Number | 110103-500 |
| Top Drive Models | TDS-4SA, TDS-8SA, TDS-10SA, TDS-11SA |
| Working Pressure | 5,000 psi |
| Bore | 3-1/4" |
| Valve Type | Manual ball (T-handle) |
| Body | 4130 alloy steel |
| Seals | NBR |
| Top Connection | 4-1/2" IF female |
| Bottom Connection | 3-1/2" IF male |
| Top Drive Model | Direct Fit | Requires Adapter |
|---|---|---|
| TDS-4SA | Yes | No |
| TDS-8SA | Yes | No |
| TDS-10SA | Yes | No |
| TDS-11SA | Yes | No |
All four models use the same spindle thread configuration, making the 110103-500 truly interchangeable.
Reduced inventory – one spare part covers multiple rigs
Lower procurement cost – volume pricing for a single SKU
Simplified maintenance – same service kit and procedures
Flexible deployment – move IBOPs between different top drives as needed
For H₂S environments, order 110103-502 (NACE MR0175). The -502 version is also compatible with all four TDS models.
For fleet pricing and cross-model documentation:
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.