110103-500 Upper IBOP – Dedicated for TDS-4SA Top Drive

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The 110103-500 is an upper inner blowout preventer (IBOP) manufactured to NOV Varco specifications for the TDS-4SA top drive system. It provides primary drill string isolation with 5,000 psi working pressure, 3-1/4" bore, manual ball valve operation. 4130 alloy steel body, NBR seals, API 7-1 compliant.

Conatct For Details
DetailReview(0)Additional

Precision Fit for Varco TDS-4SA

The 110103-500 Upper Inner Blowout Preventer is engineered to match the TDS-4SA top drive from NOV Varco. It mounts directly between the top drive spindle and the drill string, serving as the primary barrier against uncontrolled flow from inside the drill pipe.

When the TDS-4SA is used on medium-depth land rigs or offshore workover units, this IBOP becomes an essential component for safe connections, tripping, and well control.

Key Specifications for TDS-4SA

  • Part Number: 110103-500

  • Top Drive Compatibility: TDS-4SA (direct fit)

  • Type: Manual ball valve, T-handle operation

  • Working Pressure: 5,000 psi (34.5 MPa)

  • Test Pressure: 7,500 psi (51.7 MPa)

  • Bore Diameter: 3-1/4" (82.6 mm)

  • Top Connection: 4-1/2" IF female (mates with TDS-4SA spindle)

  • Bottom Connection: 3-1/2" IF male

  • Body Material: 4130 alloy steel forging

  • Seals: NBR (nitrile rubber)

  • Temperature Range: -20°C to 121°C (-4°F to 250°F)

Why This IBOP for TDS-4SA?

  • Direct mechanical fit – no adapters or modifications needed

  • Matched torque rating – compatible with TDS-4SA operating parameters

  • API 16D certified – meets industry well control requirements

  • Field proven – used on thousands of TDS-4SA installations

Installation on TDS-4SA

  1. Thread the 110103-500 upper IBOP directly onto the TDS-4SA lower spindle using API 7-1 thread compound.

  2. Torque to 13,500 – 15,000 N·m.

  3. Perform low-pressure (500 psi) and high-pressure (5,000 psi) tests per API 16D.

  4. Cycle the valve fully open and closed to verify smooth operation.

Applications with TDS-4SA

  • Medium-depth drilling (≤ 3,500 m)

  • Workover and completion operations

  • Land rigs and jack-up platforms

  • Non-sour environments (standard NBR seals)

Contact for TDS-4SA IBOP

For pricing, delivery, or technical drawings:
Email: info@hyrig.com

*We also stock the lower IBOP 114706-500 for TDS-4SA.*


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit