2" 5000psi Demco Mud Valve Materials – 4130 Forged, 410 SS Nitrided, NACE | HYRIG

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Materials of HYRIG 2" 5000psi Demco mud valve: body 4130 forged steel, gate 410 SS nitrided (or options), stem 410 SS, seat elastomer NBR or HNBR, fasteners B7/L7. NACE MR‑01‑75 compliant for H₂S. Offers nickel plating, aluminum bronze, Monel, 316 SS for severe service.

Conatct For Details
DetailReview(0)Additional

Overview
The HYRIG 2" 5000psi Demco mud valve is constructed from premium, high-grade alloys specifically selected to defeat abrasive wear, general corrosion, and sulfide stress cracking (SSC) in oilfield applications.

Core Material Specifications

  • Valve Body: 4130 / 4140 Alloy Steel (One-piece forging). Provides superior pressure containment, impact toughness, and eliminates the porosity risks associated with castings. Available in NACE MR-01-75 compliant grades for H₂S service.

  • Gate (Standard & Upgrades):

    • Standard: 410 Stainless Steel with surface nitriding (45-62 HRC) for excellent abrasion resistance.

    • Upgrade Options: Nickel-plated carbon steel (abrasive), Aluminum Bronze (corrosive/abrasive), Monel (severe H₂S), or 316 SS (high-corrosion).

  • Valve Stem: 410 Stainless Steel (hardened) or 303 SS. Designed with a rising stem mechanism to prevent galling and provide visual position feedback.

  • Sealing Elastomers:

    • NBR (Nitrile): Standard, -40°C to +100°C, good for oil/water.

    • HNBR: Premium upgrade, -30°C to +150°C, excellent resistance to oil, H₂S, and chemicals.

  • Fasteners: B7 Studs & L7 Nuts – High-strength, heat-treated alloy steel with zinc plating for anti-corrosion.

Corrosion Protection Features

  1. NACE MR-01-75 Compliance: Full material selection and heat treatment are controlled to prevent SSC in sour wells.

  2. Hardfacing: The nitrided gate surface provides a hard, wear-resistant barrier against erosive slurry.

  3. Pressure-Assisted Sealing: The design uses line pressure to energize the soft seats, ensuring a tighter seal under high differential pressure.

  4. Traceability: All critical components are supplied with full material test reports (MTRs) per API 6A PSL3/PSL4.

Material Class Selection (API 6A)

ClassService ConditionsRecommended Configuration
AAGeneral, non-corrosive4130 body, 410 gate, NBR seals
BB/CCMild/Moderate corrosion4130 body, 410 gate, HNBR seals
DDSour (H₂S)NACE 4130 body, Monel gate, HNBR
EE/FFSevere Sour + CorrosionNACE 4130 body, Monel/316 gate, HNBR

For certified material test reports or custom alloy selection, contact us at info@hyrig.com.



Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit