Overview
The HYRIG 2" 5000psi Demco mud valve can be configured with various materials and seals to match the specific challenges of your well environment. Use this guide to select the optimal configuration for maximum reliability and lifespan.
Service Condition Categories
Standard Drilling Mud: Water-based mud, light slurry.
Recommended: 4130 body, Nitrided 410 SS gate, NBR seals.
High-Temperature / Chemical Service: Oil-based mud, elevated temperatures (>100°C).
Recommended: 4130 body, 410 SS or 316 SS gate, HNBR seals.
Sour Service (H₂S / CO₂): NACE MR-01-75 environment.
Recommended: NACE-compliant 4130 body, 410 SS or Monel gate, HNBR seals.
Abrasive / High-Solids: High sand content, cement, fracturing fluids.
Recommended: 4130 forged body, Nickel-plated/Aluminum Bronze/Monel gate, HNBR seals.
Corrosive / Saltwater: Saltwater injection, corrosive fluids.
Recommended: 4130 body, 316 SS or Monel gate, HNBR seals.
Seal & Material Selection Matrix
| Material | Temp. Range | H₂S Resistance | Best Application |
|---|---|---|---|
| NBR | -40°C to +100°C | Limited | Standard water-based mud |
| HNBR | -30°C to +150°C | Excellent | H₂S, high-temp, oil-based mud |
| Nitrided 410 SS | -46°C to +121°C | Good | Standard & mildly abrasive services |
| Monel / Aluminum Bronze | -46°C to +150°C | Excellent | Severe sour & abrasive environments |
API 6A Material Classes
Select the appropriate class based on H₂S and CO₂ content: AA (General), BB/CC (Mild/Moderate corrosion), DD/EE/FF (Sour service with increasing severity). When ordering, specify your operating temperature, media composition, and H₂S partial pressure to ensure you receive the correct configuration.
For expert consultation on your specific downhole conditions, reach out to info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.