Overview
The HYRIG 2" 7500psi Demco high‑pressure mud valve (M2031-HP) is constructed from premium, high‑grade materials specifically selected for extreme high‑pressure and sour service applications. All components in this HP series are exclusive high‑pressure specifications and are NOT interchangeable with any 5,000 PSI standard parts.
Core Material Specifications
Valve Body
Material: 4130 / 4140 Alloy Steel (Heavy‑Wall, Thick‑Section)
Manufacturing: One‑piece forging – significantly increased wall thickness over 5,000 PSI version
Properties: High strength, excellent pressure containment, impact resistance, no casting defects
Corrosion Protection: NACE MR0175 compliant for H₂S/CO₂ service
Available Material Classes: AA, BB, CC, DD, EE, FF
Gate Material Options (HP Service)
| Material | Hardening | Wear Resistance | Corrosion Resistance | Best HP Application |
|---|---|---|---|---|
| 410 Stainless Steel (Nitrided) | Surface Nitriding (Thickened) | Excellent | Good | Standard HP drilling mud |
| Nickel‑Plated Carbon Steel | Nickel Plating | Very Good | Good | Abrasive HP slurries |
| Aluminum Bronze | As‑cast/Hardened | Excellent | Excellent | Corrosive/abrasive HP service |
| Monel | As‑cast | Excellent | Excellent | Severe H₂S/corrosive HP |
| 316 Stainless Steel | As‑rolled | Good | Excellent | High‑corrosion HP service |
Valve Stem (HP Specific)
Material: 410 Stainless Steel (Oversized/Reinforced)
Properties: Hardened surface, anti‑galling, corrosion‑resistant
Design: Rising stem provides visual position indication; oversized diameter to handle high pressure torque loads
Seat & Seal Materials (HP Only)
| Component | Standard Material | Properties |
|---|---|---|
| Seat Insert | Stainless Steel | Wear‑resistant, HP rated |
| Seat Elastomer | HNBR (Sole Option) | Oil/H₂S/chemical resistant, HP rated |
| Bonnet Seal | HNBR | High‑pressure sealing |
| Stem Packing | HNBR / Fabric | HP stem sealing |
Elastomer – HP Service Only
| Property | HNBR |
|---|---|
| Temperature Range | -30°C to +150°C |
| Pressure Rating | 7,500 PSI (Continuous) |
| Oil Resistance | Excellent |
| H₂S Resistance | Excellent |
| Abrasion Resistance | Very Good |
| Chemical Resistance | Excellent |
| Availability | Sole option for M2031-HP – NBR not offered |
Fastener Materials (HP Specific)
| Fastener | Material | Properties |
|---|---|---|
| Studs | B7 Alloy Steel | High strength, heat‑treated, HP rated |
| Nuts | L7 Alloy Steel | High strength, matched to studs, HP rated |
| Corrosion Protection | Zinc plating / Coating | Anti‑corrosion |
HP Corrosion Protection Features
Heavy‑Wall Construction: Increased wall thickness provides additional corrosion allowance and pressure containment margin.
NACE MR‑01‑75 Compliance: All materials selected for sour HP service meet NACE requirements for H₂S and CO₂‑containing media.
Hardened Wear Surfaces: Gate surface nitriding provides excellent wear and corrosion resistance under HP cycling.
HNBR Elastomer: Provides superior resistance to oil, chemicals, and H₂S at HP and high‑temperature conditions. This is the ONLY seal material offered.
Full Material Traceability: All critical components have full material certifications; manufacturing records maintained per API 6A PSL3/PSL4.
Explosion‑Proof Retaining: Special retaining rings and fasteners designed to withstand HP surge events.
Material Class Selection (API 6A)
| Class | Service Conditions | Recommended HP Configuration |
|---|---|---|
| AA | General HP | 4130 HP body, 410 gate, HNBR |
| BB | Mild corrosion HP | 4130 HP body, 410 gate, HNBR |
| CC | Moderate corrosion HP | 4130 HP body, 410 gate, HNBR |
| DD | Sour (H₂S) HP | 4130 NACE HP body, 410 SS/Monel gate, HNBR |
| EE | Sour + corrosion HP | 4130 NACE HP body, Monel/316 SS gate, HNBR |
| FF | Severe sour + corrosion HP | 4130 NACE HP body, Monel gate, HNBR |
For certified material test reports or custom alloy selection, contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.