Product Brief
Selection guide for 2" 7500psi Demco HP mud valve: choose gate material and end connections based on media. HNBR is the ONLY seal option for HP service. Gate options: nitrided 410 SS, nickel‑plated, aluminum bronze, Monel, 316 SS. End connections: BW, flanged, hammer union. Deep well HP service.
Full Description
Overview
The HYRIG 2" 7500psi Demco high‑pressure mud valve (M2031-HP) is a dedicated high‑pressure series designed specifically for deep‑well and ultra‑deep‑well drilling. This guide helps you select the optimal configuration for your specific service conditions. Note: HNBR is the ONLY seal material offered for this HP series – NBR is not available.
Service Condition Categories
| Condition | Media Characteristics | Recommended Configuration |
|---|---|---|
| Standard HP Drilling Mud | Water‑based mud, light slurry, HP service | 4130 HP body, Nitrided 410 SS gate, HNBR seals |
| High‑Temperature HP Service | Oil‑based mud, elevated temps (>100°C), HP | 4130 HP body, 410 SS or 316 SS gate, HNBR seals |
| Sour HP Service (H₂S / CO₂) | NACE MR‑01‑75 environment, HP | NACE‑compliant 4130 HP body, 410 SS or Monel gate, HNBR seals |
| Abrasive / High‑Solids HP | High sand content, cement, fracturing fluids | 4130 HP body, Nickel‑plated/Aluminum Bronze/Monel gate, HNBR seals |
| Corrosive / Saltwater HP | Saltwater injection, corrosive HP fluids | 4130 HP body, 316 SS or Monel gate, HNBR seals |
Seal Material – HP Service Only
| Seal Material | Temperature Range | H₂S Resistance | HP Rating | Availability |
|---|---|---|---|---|
| HNBR | -30°C to +150°C | Excellent | 7,500 PSI | Sole option for M2031-HP |
| NBR | -40°C to +100°C | Limited | 5,000 PSI | NOT available for M2031-HP |
Gate Material Options for HP Service
| Gate Material | Wear Resistance | Corrosion Resistance | Best HP Application |
|---|---|---|---|
| 410 SS, Nitrided | Excellent | Good | Standard HP drilling mud |
| Nickel‑Plated Carbon Steel | Very Good | Good | Abrasive HP slurries |
| Aluminum Bronze | Excellent | Excellent | Corrosive/abrasive HP service |
| Monel | Excellent | Excellent | Severe H₂S / corrosive HP |
| 316 SS | Good | Excellent | High‑corrosion HP service |
End Connection Selection for HP Service
| Connection | Best For | Advantages |
|---|---|---|
| Butt‑Weld (BW) | Permanent high‑pressure piping | Leak‑free, high integrity, preferred for HP |
| RTJ Flanged | Standard wellhead equipment | Easy disassembly, standardized HP flanges |
| Hammer Union | Quick‑connect HP mud lines | Rapid connect/disconnect |
API 6A Material Classes for HP Service
| Class | Service Conditions | Recommended HP Configuration |
|---|---|---|
| AA | General, non‑corrosive HP | 4130 HP body, 410 gate, HNBR |
| BB/CC | Mild/Moderate corrosion HP | 4130 HP body, 410 gate, HNBR |
| DD | Sour (H₂S) HP | NACE 4130 HP body, Monel gate, HNBR |
| EE/FF | Severe Sour + Corrosion HP | NACE 4130 HP body, Monel/316 gate, HNBR |
Ordering Information
When placing an order, please specify:
Size (2") and pressure class (7,500 PSI)
End connection type (BW, RTJ, or hammer union)
Working conditions (temperature, media, H₂S content)
Material class required
Note: HNBR is the only seal option – no NBR available
For expert consultation on your specific high‑pressure downhole conditions, reach out to info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.