HYRIG can supply the 2-inch 5000 psi soft seal mud gate valve and its replacement parts. This manual, rising-stem gate valve features a 2" (DN50) bore and a rubber seat (soft seal) design, engineered for drilling mud service at pressures up to 5,000 psi (35 MPa). It is available with LCSG, LP, BW, or RJ end connections for versatile manifold integration.
| Size & Pressure | Nominal Diameter | Pressure (MPa) | L (mm) | H (mm) | Available Connections |
|---|---|---|---|---|---|
| 2in 5000 psi | 50 mm | 35 MPa | 228.6 mm | 400 mm | LCSG / LP / BW / RJ |
| 2in 3000 psi | 50 mm | 21 MPa | 228.6 mm | 400 mm | LCSG / LP / BW / RJ |
Data source: Technical data table.
Need a lower pressure rating? View the 2in 3000 psi Soft Seal Mud Valve or explore the full Soft Seal Mud Valve Series.
The exact footprint for the 2-inch 5000 psi configuration is:
Note: The structural dimensions (L and H) remain the same regardless of whether LCSG, LP, BW, or RJ connections are selected. Verify your pipe cut-out length before ordering.
This valve utilizes a soft seal (rubber seat) design, providing a tight shut-off with lower operating torque. The 5,000 psi rating makes it suitable for high-pressure mud lines.
You can select the end connection based on your manifold design: LCSG/LP for threaded pipes, BW for permanent welding, and RJ for flanged connections.
Replacing an older 2-inch mud valve? Here is what to verify:
This configuration is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure which end connection (LCSG, LP, BW, RJ) is right for your system? Our engineers can help. Tell us your pipe specifications, and we will verify the correct configuration.
We supply replacement parts for this model, including rubber seats, gates, and stem packing kits. See our Mud Valve Parts page for compatible repair kits.
Q: What is the face-to-face length of this valve?
A: The overall length (L) is 228.6 mm.
Q: Does the connection type affect the valve dimensions?
A: No. The L (228.6 mm) and H (400 mm) dimensions are standard for this 2-inch 5000 psi body, regardless of whether you choose LCSG, LP, BW, or RJ ends.
Q: Is this a soft seal or hard seal valve?
A: This series utilizes a soft seal (rubber seat) design.
Q: What is the typical lead time?
A: Standard lead time is 15-20 days. Contact us for expedited options.
For 2-inch 5000 psi soft seal mud gate valve selection, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.