Soft Seal Mud Gate Valve Series | LCSG/LP/BW/RJ Connections

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the soft seal mud gate valve series and its replacement parts. These manual, rising-stem gate valves are available in 2" and 4" bore sizes, with pressure ratings from 1,000 psi (7 MPa) to 5,000 psi (35 MPa). They feature a rubber seat (soft seal) design and offer versatile end connections, including LCSG, LP, BW (Butt Weld), and RJ (Ring Joint).
Conatct For Details
DetailReview(0)Additional

Soft Seal Mud Gate Valve Series (LCSG/LP/BW/RJ)

HYRIG can supply the soft seal mud gate valve series and its replacement parts. These manual, rising-stem gate valves are available in 2" and 4" bore sizes, with pressure ratings from 1,000 psi (7 MPa) to 5,000 psi (35 MPa). They feature a rubber seat (soft seal) design and offer versatile end connections, including LCSG, LP, BW (Butt Weld), and RJ (Ring Joint).

Key Facts

  • Valve Type: Manual rising-stem slab gate valve
  • Nominal Size: 2" (DN50) and 4" (DN100)
  • Working Pressure: 1,000 psi (7 MPa) to 5,000 psi (35 MPa)
  • Available Connections: LCSG, LP, BW (Butt Weld), RJ (Ring Joint)
  • Sealing Mechanism: Soft Seal (Rubber Seat)
  • Operation: Handwheel

Specifications & Dimensions Overview

Size & PressureNominal DiameterPressure (MPa)L (mm)H (mm)Available Connections
2in 5000 psi5035228.6400LCSG / LP / BW / RJ
2in 3000 psi5021228.6400LCSG / LP / BW / RJ
4in 5000 psi10035330740LCSG / LP / BW / RJ
4in 3000 psi10021330590LCSG / LP / BW / RJ
4in 1000 psi1007300422LCSG / LP / BW / RJ

Data source: Technical data table.

Dimensions

This series provides flexible integration for various manifold designs. The structural length (L) for the 2" models is 228.6 mm, while the 4" models range from 300 mm (1000 psi) to 330 mm (5000 psi). The overall height (H) also varies by pressure class. Please refer to individual model pages for exact footprint details to ensure proper fitment in your manifold.

Structure & Working Principle

The soft seal design utilizes an elastomer (rubber) seat to create a tight, bubble-proof seal against the slab gate. This design requires lower operating torque compared to metal-to-metal valves and is more forgiving of minor surface imperfections on the gate.

The available end connections provide flexibility: LCSG and LP for threaded pipelines, BW (Butt Weld) for permanent welded installations, and RJ (Ring Joint) for high-pressure flanged manifolds.

Cross-Reference & Replacement

Replacing an older mud valve? Here is what to verify:

  1. Connection Type: Determine if your pipeline requires threaded (LCSG/LP), welded (BW), or flanged (RJ) connections.
  2. Face-to-Face: Measure your existing cut-out length (L-dimension) to match the table above.
  3. Pressure Rating: Verify the manifold rating (1000, 3000, or 5000 psi).
  4. Seal Type: Confirm soft seal (rubber) is suitable for your mud conditions.

Applications

This series is specifically suited for:

  • Standard drilling mud manifolds.
  • Cementing and pumping units.
  • Low to medium-pressure standpipes where tight shut-off is required.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure which connection type fits your manifold? Tell us your pipe specifications (threaded, welded, or flanged) and pressure requirements, and our engineers will confirm the exact configuration.

Spare Parts

HYRIG provides replacement parts for this series, including rubber seats, gates, and stem packing kits. See our Mud Valve Parts page for compatible repair kits.

Frequently Asked Questions

Q: What do LCSG, LP, BW, and RJ stand for?
A: LCSG and LP refer to line pipe threads, BW stands for Butt Weld, and RJ stands for Ring Joint (flanged).

Q: Does this valve use a metal or rubber seat?
A: This series utilizes a soft seal (rubber seat) design.

Q: What is the maximum pressure rating available?
A: The maximum working pressure in this series is 5,000 psi (35 MPa).

Contact

For soft seal mud gate valve series selection and replacement parts, contact HYRIG: info@hyrig.com

Page last updated: 2026-11-08

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit