HYRIG can supply replacement parts for the Z23Y union mud gate valve series. Find metal-to-metal gate and seat assemblies, stem packing kits, handwheels, and union wing nuts for your specific model.
Due to variations in manufacturing batches, we supply parts based on precise dimensional verification rather than unverified OEM part numbers.
| Component Group | Description | Replacement Action |
|---|---|---|
| Gate & Seat Assembly | Solid slab gate with hard-faced floating seats | Core wear part. Replace as a set to ensure seal integrity. |
| Stem & Packing Kit | Rising stem with elastomer/PTFE packing | Replace if stem leaks or operates roughly. |
| Handwheel & Nut | Manual operation assembly | Replace if stripped or seized. |
| Union End Seals | Hammer union seals (FIG1002/1003/1502) | Standard wear item. Replace upon every valve overhaul. |
Data source: Technical data and parts list.
For exact dimensions of the replacement parts, please refer to your specific valve model (e.g., Z23Y-50-35-1003) or provide the valve nameplate details to our engineers. We ensure the replacement gate and seat perfectly match the original structural length (L) and bore size.
Looking for a repair kit for your Z23Y valve? Here's what to check:
These parts are compatible with the following Z23Y series models:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure which repair kit matches your valve? Send us a photo of the valve nameplate and the structural length (L). Our engineers will confirm the exact replacement parts for your system.
Q: Do you provide a complete repair kit?
A: Yes. We offer minor kits (seals and packing) and major kits (including gate and seat).
Q: Can I replace the gate without replacing the seats?
A: It is highly recommended to replace the gate and seat as a matched set to maintain the metal-to-metal seal integrity.
Q: How do I verify if this fits my Z23Y-100 valve?
A: Provide the full model number (e.g., Z23Y-100-35-1502) and the face-to-face length (L). We will cross-verify the dimensions.
Q: What is the typical lead time for spare parts?
A: Standard lead time for parts is 10-15 days. For urgent downtime, contact us for expedited shipping.
For Z23Y mud gate valve parts selection, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.