Z23Y-50-35 FIG1502 Mud Gate Valve | 2" 5000 psi Hard Seal

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Z23Y series union mud gate valve range and its replacement parts. The Z23Y-50-35-1502 is a manual, rising-stem gate valve with a 2" (DN50) bore, engineered for abrasive drilling mud service at pressures up to 5,000 psi (35 MPa). It features a standard FIG1502 hammer union connection and a precision-lapped metal-to-metal (hard) seal for reliable shut-off in high-pressure manifolds.
Conatct For Details
DetailReview(0)Additional

Z23Y-50-35-1502 Mud Gate Valve (2" / 5,000 psi / FIG1502)

HYRIG can supply the Z23Y series union mud gate valve range and its replacement parts. The Z23Y-50-35-1502 is a manual, rising-stem gate valve with a 2" (DN50) bore, engineered for abrasive drilling mud service at pressures up to 5,000 psi (35 MPa). It features a standard FIG1502 hammer union connection and a precision-lapped metal-to-metal (hard) seal for reliable shut-off in high-pressure manifolds.

Key Facts

  • Valve Type: Manual rising-stem slab gate valve
  • Nominal Size: 2" (DN50)
  • Working Pressure: 5,000 psi / 35 MPa
  • Connection Type: Union (Male thread) / FIG1502
  • Sealing Mechanism: Metal-to-Metal (Hard Seal / Y-type)
  • Overall Length (L): 212 mm
  • Temperature Level: -46°C to 121°C (Level L-U)
  • Operation: Handwheel

Z23Y-50-35 Model Specifications & Dimensions

Model NumberNominal DiameterWorking PressureL (Length)H (Height)A (Width)End Connection
Z23Y-50-35-100350 mm (2")35 MPa (5,000 psi)205 mm443 mm70.5 mmFIG1003
Z23Y-50-35-150250 mm (2")35 MPa (5,000 psi)212 mm443 mm70.5 mmFIG1502
Z23Y-50-35-1502F50 mm (2")35 MPa (5,000 psi)225 mm416 mm61 mmFIG1502

Data source: Technical data table.
Need a different connection? View the Z23Y-50-35-1003 Mud Valve or explore the full Z23Y Union Mud Valve Series.

Dimensions

Based on the standard Z23Y series design, the exact footprint for the Z23Y-50-35-1502 is:

  • Face-to-Face (Length L): 212 mm
  • Overall Height (H): 443 mm (including handwheel and stem)
  • Body Width (A): 70.5 mm
  • Weight: Approx. 48 kg (dry weight)

These dimensions are critical for replacing existing valves in confined manifold spaces. Verify your current L-dimension before ordering.

Structure & Working Principle

The Z23Y series utilizes a parallel metal-to-metal sealing design (indicated by the "Y" in the model code). The solid slab gate is sandwiched between two floating seat rings. When the valve is closed, line pressure pushes the downstream seat against the gate, creating a hard seal. The hard-faced metal seats provide drop-in reliability and survive pressure spikes and abrasive cuttings.

Cross-Reference & Replacement

Replacing an older hammer union mud valve? Here is what to verify:

  1. Union Size: Ensure the connection is exactly FIG1502 (standard 2" high-pressure union).
  2. Face-to-Face: Confirm your existing piping requires a 212 mm length.
  3. Seal Type: If your current valve uses rubber seats (R-type), upgrading to this hard seal (Y-type) will drastically reduce maintenance downtime.
  4. Pressure Rating: Match the 5,000 psi (35 MPa) manifold rating.

Applications

The Z23Y-50-35-1502 is specifically suited for:

  • Mud pump discharge lines (2-inch branch connections).
  • Standpipe manifolds requiring frequent valve cycling.
  • Choke and kill manifolds where hard sealing is mandatory for abrasive slurries.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if FIG1502 or FIG1003 is the right fit? Our engineers can help. Tell us your manifold working pressure and line size, and we will verify the correct Z23Y model or recommend a compatible replacement.

Spare Parts

We supply replacement parts for the entire Z23Y-50 series, including:

  • Gate and Seat Assemblies (Metal-to-Metal)
  • Stem and Packing Kits
  • Handwheel and Stem Nut
  • Union Wing Nuts and Seals

See our Z23Y Mud Valve Parts page for compatible repair kits.

Frequently Asked Questions

Q: What is the maximum pressure for the Z23Y-50-35-1502?
A: The maximum working pressure is 35 MPa (5,000 psi).

Q: What is the difference between this and the FIG1003 model?
A: The main difference is the union connection type. The FIG1502 uses a different thread and wing nut size, resulting in a slightly longer overall length (212 mm vs 205 mm).

Q: What is the face-to-face length of this specific valve?
A: The overall length (L) from end to end of the union is 212 mm.

Q: Can this valve handle H2S (sour gas) service?
A: Standard configurations are suitable for standard mud service. For H2S compliance (NACE MR0175), please specify your requirements when contacting us.

Q: What is the typical lead time?
A: Standard lead time is 15-20 days. If you have an urgent drilling downtime situation, contact us directly for expedited shipping options.

Contact

For Z23Y-50-35-1502 mud gate valve selection and replacement parts, contact HYRIG: info@hyrig.com

Page last updated: 2026-11-08

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit