Z23Y Union Mud Gate Valve Series | 2" to 5" 5000 to 10000 psi

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Z23Y union mud gate valve series and its replacement parts. The Z23Y series are manual, rising-stem gate valves engineered for abrasive drilling mud service at pressures up to 10,000 psi (70 MPa). They feature precision-lapped metal-to-metal (hard) seals and standard hammer union connections (FIG1002, FIG1003, FIG1502) for reliable shut-off in high-pressure manifolds.
Conatct For Details
DetailReview(0)Additional

Z23Y Union Mud Gate Valve Series

HYRIG can supply the Z23Y union mud gate valve series and its replacement parts. The Z23Y series are manual, rising-stem gate valves engineered for abrasive drilling mud service at pressures up to 10,000 psi (70 MPa). They feature precision-lapped metal-to-metal (hard) seals and standard hammer union connections for reliable shut-off in high-pressure manifolds.

Key Facts

  • Valve Type: Manual rising-stem slab gate valve
  • Nominal Size: 2" to 5" (DN50 to DN126)
  • Working Pressure: 5,000 psi (35 MPa) to 10,000 psi (70 MPa)
  • Connection Type: Union (Male thread) / FIG1002, FIG1003, FIG1502
  • Sealing Mechanism: Metal-to-Metal (Hard Seal / Y-type)
  • Temperature Level: -46°C to 121°C (Level L-U)
  • Operation: Handwheel

Z23Y Series Specifications & Dimensions

Model NumberNominal Diameter (mm)Pressure (MPa)L (mm)H (mm)A (mm)Connection
Z23Y-50-35-1003503520544370.5FIG1003
Z23Y-50-35-1502503521244370.5FIG1502
Z23Y-50-35-1502F503522541661FIG1502
Z23Y-50-70F507027544574FIG1502
Z23Y-75-35-1003753527063398FIG1003
Z23Y-75-35-1502753527063398FIG1502
Z23Y-75-70F757032064884FIG1502
Z23Y-100-35-10021003533063090FIG1002
Z23Y-100-35-10031003533063090FIG1003
Z23Y-100-35-15021003533063090FIG1502
Z23Y-100-70F10070380767155FIG1003
Z23Y-126-35F12635497924.5186.5FIG1003

Data source: Technical data table.

Dimensions

This series covers bore sizes from 50 mm (2") to 126 mm (5"). The structural length (L) ranges from 205 mm for the 2" 5,000 psi model to 497 mm for the 5" 5,000 psi model. The overall height (H) and width (A) scale with the pressure rating and body size. Ensure adequate manifold clearance based on the H and A values in the table above.

Structure & Working Principle

The Z23Y series utilizes a parallel metal-to-metal sealing design (Y-type). The solid slab gate is sandwiched between two floating seat rings. When the valve is closed, line pressure pushes the downstream seat against the gate, creating a hard seal. The hard-faced metal seats (typically tungsten or nickel-based alloy) provide drop-in reliability and survive pressure spikes, eliminating the washout issues common in soft-seated valves.

Cross-Reference & Replacement

Replacing an older hammer union mud valve? Here is what to verify:

  1. Union Size: Match the exact FIG connection (FIG1002, FIG1003, or FIG1502).
  2. Face-to-Face: Confirm the existing piping requires the same L-dimension listed in the table.
  3. Pressure Rating: Ensure the manifold pressure rating matches the valve (35 MPa vs 70 MPa).
  4. Seal Type: Verify if a hard seal (Y-type) is required for your abrasive mud application.

Applications

The Z23Y series is specifically suited for:

  • Mud pump discharge lines requiring reliable high-pressure isolation.
  • Standpipe manifolds where frequent valve cycling is needed.
  • Choke and kill manifolds handling abrasive slurries.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure which model fits your manifold? Explore our most popular sizes: Z23Y-50-35-1003 or Z23Y-100-35-1502. Tell us your line size and pressure requirements, and our engineers will confirm the exact model.

Spare Parts

HYRIG provides a full range of replacement parts for the Z23Y series, including gate and seat assemblies, stem packing kits, and handwheels. See our Z23Y Mud Valve Parts page for compatible repair kits.

Frequently Asked Questions

Q: What does the "Y" mean in the Z23Y model code?
A: The "Y" stands for hard seal (metal-to-metal), designed for abrasive mud. "R" indicates a soft seal.

Q: Are different FIG connections available?
A: Yes. The Z23Y series is available with FIG1002, FIG1003, and FIG1502 hammer unions.

Q: What is the maximum pressure rating of this series?
A: The maximum working pressure is 70 MPa (10,000 psi), specifically for the 70F models.

Q: What is the typical lead time for a full series order?
A: Standard lead time is 15-20 days. For urgent drilling downtime situations, contact us directly for expedited shipping options.

Contact

For Z23Y union mud gate valve series selection and replacement parts, contact HYRIG: info@hyrig.com

Page last updated: 2026-11-08

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit