Z23Y-75-35 FIG1502 Mud Gate Valve | 3" 5000 psi Hard Seal

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Z23Y series union mud gate valve range and its replacement parts. The Z23Y-75-35-1502 is a manual, rising-stem gate valve with a 3" (DN75) bore, engineered for abrasive drilling mud service at pressures up to 5,000 psi (35 MPa). It features a standard FIG1502 hammer union connection and a precision-lapped metal-to-metal (hard) seal.
Conatct For Details
DetailReview(0)Additional

Z23Y-75-35-1502 Mud Gate Valve (3" / 5,000 psi / FIG1502)

HYRIG can supply the Z23Y series union mud gate valve range and its replacement parts. The Z23Y-75-35-1502 is a manual, rising-stem gate valve with a 3" (DN75) bore, engineered for abrasive drilling mud service at pressures up to 5,000 psi (35 MPa). It features a standard FIG1502 hammer union connection and a precision-lapped metal-to-metal (hard) seal for reliable shut-off in high-pressure manifolds.

Key Facts

  • Valve Type: Manual rising-stem slab gate valve
  • Nominal Size: 3" (DN75)
  • Working Pressure: 5,000 psi / 35 MPa
  • Connection Type: Union (Male thread) / FIG1502
  • Sealing Mechanism: Metal-to-Metal (Hard Seal / Y-type)
  • Overall Length (L): 270 mm
  • Temperature Level: -46°C to 121°C (Level L-U)
  • Operation: Handwheel

Z23Y-75 Series Model Specifications & Dimensions

Model NumberNominal DiameterWorking PressureL (Length)H (Height)A (Width)End Connection
Z23Y-75-35-100375 mm (3")35 MPa (5,000 psi)270 mm633 mm98 mmFIG1003
Z23Y-75-35-150275 mm (3")35 MPa (5,000 psi)270 mm633 mm98 mmFIG1502
Z23Y-75-70F75 mm (3")70 MPa (10,000 psi)320 mm648 mm84 mmFIG1502

Data source: Technical data table.
Need a different connection? View the Z23Y-75-35-1003 Mud Valve or explore the full Z23Y Union Mud Valve Series.

Dimensions

Based on the standard Z23Y series design, the exact footprint for the Z23Y-75-35-1502 is:

  • Face-to-Face (Length L): 270 mm
  • Overall Height (H): 633 mm (including handwheel and stem)
  • Body Width (A): 98 mm
  • Weight: Approx. 115 kg (dry weight)

These dimensions are critical for replacing existing valves in confined manifold spaces. Verify your current L-dimension before ordering.

Structure & Working Principle

The Z23Y series utilizes a parallel metal-to-metal sealing design (indicated by the "Y" in the model code). The solid slab gate is sandwiched between two floating seat rings. When the valve is closed, line pressure pushes the downstream seat against the gate, creating a hard seal. The hard-faced metal seats provide drop-in reliability and survive pressure spikes and abrasive cuttings.

Cross-Reference & Replacement

Replacing an older hammer union mud valve? Here is what to verify:

  1. Union Size: Ensure the connection is exactly FIG1502 (3-inch size).
  2. Face-to-Face: Confirm your existing piping requires a 270 mm length.
  3. Seal Type: If your current valve uses rubber seats (R-type), upgrading to this hard seal (Y-type) will drastically reduce maintenance downtime.
  4. Pressure Rating: Match the 5,000 psi (35 MPa) manifold rating.

Applications

The Z23Y-75-35-1502 is specifically suited for:

  • Mud pump discharge lines.
  • Standpipe manifolds requiring frequent valve cycling.
  • Choke and kill manifolds where hard sealing is mandatory for abrasive slurries.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if FIG1003 or FIG1502 is the right fit? Our engineers can help. Tell us your manifold working pressure and line size, and we will verify the correct Z23Y model.

Spare Parts

We supply replacement parts for the entire Z23Y-75 series, including gate and seat assemblies, stem packing kits, and handwheels. See our Z23Y Mud Valve Parts page for compatible repair kits.

Frequently Asked Questions

Q: What is the maximum pressure for the Z23Y-75-35-1502?
A: The maximum working pressure is 35 MPa (5,000 psi).

Q: What is the face-to-face length of this specific valve?
A: The overall length (L) from end to end of the union is 270 mm.

Q: What is the difference between FIG1003 and FIG1502?
A: They are different hammer union standards. The external dimensions of the valve body are similar, but the thread and wing nut dimensions of the union ends differ.

Q: What is the typical lead time?
A: Standard lead time is 15-20 days. Contact us for expedited options during urgent drilling downtime.

Contact

For Z23Y-75-35-1502 mud gate valve selection and replacement parts, contact HYRIG: info@hyrig.com

Page last updated: 2026-11-08

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit