Z23Y-75-70F Mud Gate Valve | 3" 10000 psi FIG1502

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Z23Y series union mud gate valve range and its replacement parts. The Z23Y-75-70F is a manual, rising-stem gate valve with a 3" (DN75) bore, engineered for extreme high-pressure abrasive drilling mud service at pressures up to 10,000 psi (70 MPa). It features a standard FIG1502 hammer union connection and a precision-lapped metal-to-metal (hard) seal.
Conatct For Details
DetailReview(0)Additional

Z23Y-75-70F Mud Gate Valve (3" / 10,000 psi / FIG1502)

HYRIG can supply the Z23Y series union mud gate valve range and its replacement parts. The Z23Y-75-70F is a manual, rising-stem gate valve with a 3" (DN75) bore, engineered for extreme high-pressure abrasive drilling mud service at pressures up to 10,000 psi (70 MPa). It features a standard FIG1502 hammer union connection and a precision-lapped metal-to-metal (hard) seal for reliable shut-off in high-pressure manifolds.

Key Facts

  • Valve Type: Manual rising-stem slab gate valve
  • Nominal Size: 3" (DN75)
  • Working Pressure: 10,000 psi / 70 MPa
  • Connection Type: Union (Male thread) / FIG1502
  • Sealing Mechanism: Metal-to-Metal (Hard Seal / Y-type)
  • Overall Length (L): 320 mm
  • Temperature Level: -46°C to 121°C (Level L-U)
  • Operation: Handwheel

Z23Y-75 Series Model Specifications & Dimensions

Model NumberNominal DiameterWorking PressureL (Length)H (Height)A (Width)End Connection
Z23Y-75-35-150275 mm (3")35 MPa (5,000 psi)270 mm633 mm98 mmFIG1502
Z23Y-75-70F75 mm (3")70 MPa (10,000 psi)320 mm648 mm84 mmFIG1502

Data source: Technical data table.
Need a lower pressure rating? View the Z23Y-75-35-1502 Mud Valve or explore the full Z23Y Union Mud Valve Series.

Dimensions

Based on the standard Z23Y series design, the exact footprint for the Z23Y-75-70F is:

  • Face-to-Face (Length L): 320 mm
  • Overall Height (H): 648 mm (including handwheel and stem)
  • Body Width (A): 84 mm
  • Weight: Approx. 130 kg (dry weight)

These dimensions are critical for replacing existing valves in confined manifold spaces. Verify your current L-dimension before ordering.

Structure & Working Principle

The Z23Y series utilizes a parallel metal-to-metal sealing design (indicated by the "Y" in the model code). The solid slab gate is sandwiched between two floating seat rings. Because this 70F model handles up to 10,000 psi, the body and stem are structurally reinforced compared to the 5,000 psi models, ensuring safety under extreme pressure spikes.

Cross-Reference & Replacement

Replacing an older high-pressure hammer union mud valve? Here is what to verify:

  1. Union Size: Ensure the connection is exactly FIG1502.
  2. Face-to-Face: Confirm your existing piping requires a 320 mm length.
  3. Pressure Rating: Match the 10,000 psi (70 MPa) manifold rating.
  4. Seal Type: Confirm hard seal (Y-type) is required.

Applications

The Z23Y-75-70F is specifically suited for:

  • High-pressure mud pump discharge lines.
  • High-pressure standpipe manifolds.
  • Choke and kill manifolds requiring 10,000 psi isolation.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if the 10,000 psi rating is required for your system? Our engineers can help. Tell us your manifold working pressure, and we will verify the correct Z23Y model.

Spare Parts

We supply replacement parts for the Z23Y-75 series, including gate and seat assemblies, stem packing kits, and handwheels. See our Z23Y Mud Valve Parts page for compatible repair kits.

Frequently Asked Questions

Q: What does the "70F" stand for in this model?
A: The "70" indicates a 70 MPa (10,000 psi) working pressure. The "F" typically denotes a specific configuration for high-pressure service.

Q: What is the face-to-face length of the Z23Y-75-70F?
A: The overall length (L) is 320 mm.

Q: Does this valve use metal-to-metal sealing?
A: Yes. The "Y" in Z23Y indicates a hard metal-to-metal seal designed for abrasive mud.

Q: What is the typical lead time?
A: Standard lead time is 20-25 days due to the high-pressure rating. Contact us for expedited options.

Contact

For Z23Y-75-70F mud gate valve selection and replacement parts, contact HYRIG: info@hyrig.com

Page last updated: 2026-11-08

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit