HYRIG can supply the Z23Y series union mud gate valve range and its replacement parts. The Z23Y-100-70F is a manual, rising-stem gate valve with a 4" (DN100) bore, engineered for extreme high-pressure abrasive drilling mud service at pressures up to 10,000 psi (70 MPa). It features a standard FIG1003 hammer union connection and a precision-lapped metal-to-metal (hard) seal for reliable shut-off in high-pressure manifolds.
| Model Number | Nominal Diameter | Working Pressure | L (Length) | H (Height) | A (Width) | End Connection |
|---|---|---|---|---|---|---|
| Z23Y-100-35-1003 | 100 mm (4") | 35 MPa (5,000 psi) | 330 mm | 630 mm | 90 mm | FIG1003 |
| Z23Y-100-70F | 100 mm (4") | 70 MPa (10,000 psi) | 380 mm | 767 mm | 155 mm | FIG1003 |
Data source: Technical data table.
Need a lower pressure rating? View the Z23Y-100-35-1003 Mud Valve or explore the full Z23Y Union Mud Valve Series.
Based on the standard Z23Y series design, the exact footprint for the Z23Y-100-70F is:
These dimensions are critical for replacing existing valves in confined manifold spaces. Verify your current L-dimension before ordering.
The Z23Y series utilizes a parallel metal-to-metal sealing design (indicated by the "Y" in the model code). The solid slab gate is sandwiched between two floating seat rings. Because this 70F model handles up to 10,000 psi, the body and stem are structurally reinforced compared to the 5,000 psi models, ensuring safety under extreme pressure spikes.
Replacing an older high-pressure hammer union mud valve? Here is what to verify:
The Z23Y-100-70F is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the 10,000 psi rating is required for your system? Our engineers can help. Tell us your manifold working pressure, and we will verify the correct Z23Y model.
We supply replacement parts for the Z23Y-100 series, including gate and seat assemblies, stem packing kits, and handwheels. See our Z23Y Mud Valve Parts page for compatible repair kits.
Q: What does the "70F" stand for in this model?
A: The "70" indicates a 70 MPa (10,000 psi) working pressure. The "F" typically denotes a specific configuration or material upgrade for high-pressure service.
Q: What is the face-to-face length of the Z23Y-100-70F?
A: The overall length (L) is 380 mm.
Q: Does this valve use metal-to-metal sealing?
A: Yes. The "Y" in Z23Y indicates a hard metal-to-metal seal designed for abrasive mud.
Q: What is the typical lead time?
A: Standard lead time is 25-30 days due to the large size and high-pressure rating. Contact us for expedited options.
For Z23Y-100-70F mud gate valve selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.