HYRIG can supply the Z23Y series union mud gate valve range and its replacement parts. The Z23Y-50-35-1502F is a manual, rising-stem gate valve with a 2" (DN50) bore, engineered for abrasive drilling mud service at pressures up to 5,000 psi (35 MPa). It features a standard FIG1502 hammer union connection and a precision-lapped metal-to-metal (hard) seal for reliable shut-off in high-pressure manifolds.
| Model Number | Nominal Diameter | Working Pressure | L (Length) | H (Height) | A (Width) | End Connection |
|---|---|---|---|---|---|---|
| Z23Y-50-35-1502 | 50 mm (2") | 35 MPa (5,000 psi) | 212 mm | 443 mm | 70.5 mm | FIG1502 |
| Z23Y-50-35-1502F | 50 mm (2") | 35 MPa (5,000 psi) | 225 mm | 416 mm | 61 mm | FIG1502 |
Data source: Technical data table.
Need a different connection? View the Z23Y-50-35-1502 Mud Valve or explore the full Z23Y Union Mud Valve Series.
Based on the standard Z23Y series design, the exact footprint for the Z23Y-50-35-1502F is:
These dimensions are critical for replacing existing valves in confined manifold spaces. Verify your current L-dimension before ordering.
The Z23Y series utilizes a parallel metal-to-metal sealing design (indicated by the "Y" in the model code). The solid slab gate is sandwiched between two floating seat rings. When the valve is closed, line pressure pushes the downstream seat against the gate, creating a hard seal. The hard-faced metal seats provide drop-in reliability and survive pressure spikes and abrasive cuttings.
Replacing an older hammer union mud valve? Here is what to verify:
The Z23Y-50-35-1502F is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure about the "F" suffix on this model? It typically indicates a specific configuration variant. Tell us your manifold working pressure and line size, and our engineers will verify the exact requirements.
We supply replacement parts for the Z23Y-50 series, including gate and seat assemblies, stem packing kits, and handwheels. See our Z23Y Mud Valve Parts page for compatible repair kits.
Q: What is the difference between Z23Y-50-35-1502 and 1502F?
A: The "F" usually denotes a specific design variation or material upgrade. The 1502F has a shorter height (416 mm vs 443 mm) and wider body (61 mm vs 70.5 mm).
Q: What is the face-to-face length of this specific valve?
A: The overall length (L) is 225 mm.
Q: Does this valve use metal-to-metal sealing?
A: Yes. The "Y" in Z23Y indicates a hard metal-to-metal seal designed for abrasive mud.
Q: What is the typical lead time?
A: Standard lead time is 15-20 days. Contact us for expedited options.
For Z23Y-50-35-1502F mud gate valve selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.