HYRIG can supply the Z13Y series internal thread mud gate valve range and its replacement parts. The Z13Y-75-35 is a manual, rising-stem gate valve with a 3" (DN75) bore and a soft seal (rubber seat) design, engineered for drilling mud service at pressures up to 5,000 psi (35 MPa). It features a standard LP 3" internal thread connection for direct integration into smaller pipe manifolds.
| Model Number | Nominal Diameter | Working Pressure | L (Length) | H (Height) | A (Width) | Joint Connection Size |
|---|---|---|---|---|---|---|
| Z13Y-50-35 | 50 mm (2") | 35 MPa (5,000 psi) | 230 mm | 443 mm | 70.5 mm | TBG2-3/8" |
| Z13Y-75-35 | 75 mm (3") | 35 MPa (5,000 psi) | 270 mm | 633 mm | 98 mm | LP3" |
Data source: Technical data table.
Need a smaller size? View the Z13Y-50-35 Soft Seal Mud Valve or explore the full Z13Y Soft Seal Series.
The exact footprint for the Z13Y-75-35 is:
These dimensions are critical for replacing existing valves in confined spaces. Verify your current L-dimension before ordering.
The Z13Y series utilizes a soft seal (rubber seat) design. The elastomer seat provides a tight shut-off with less operating torque compared to metal-seated valves. The internal thread (LP 3") ensures a compact and secure connection. This design is ideal for standard mud service where a bubble-tight seal is prioritized.
Replacing an older LP threaded mud valve? Here is what to verify:
The Z13Y-75-35 is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if LP 3" is the right thread for your pipe? Our engineers can help. Tell us your pipe specifications, and we will verify the correct Z13Y model.
We supply replacement parts for the Z13Y-75 series, including rubber seats, gates, and stem packing kits. See our Mud Valve Parts page for compatible repair kits.
Q: Is this valve a hard seal or soft seal?
A: This Z13Y series is a soft seal (rubber seat) design, providing a tight shut-off for standard mud service.
Q: What is the thread type on the Z13Y-75-35?
A: It features an LP 3" (Line Pipe) internal thread connection.
Q: What is the face-to-face length of this valve?
A: The overall length (L) is 270 mm.
Q: What is the typical lead time?
A: Standard lead time is 20-25 days. Contact us for expedited options.
For Z13Y-75-35 soft seal mud gate valve selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.