HYRIG can supply the Z13Y series internal thread mud gate valve range and its replacement parts. The Z13Y-50-35 is a manual, rising-stem gate valve with a 2" (DN50) bore and a soft seal (rubber seat) design, engineered for drilling mud service at pressures up to 5,000 psi (35 MPa). It features a standard TBG 2-3/8" internal thread connection for direct integration into smaller pipe manifolds.
| Model Number | Nominal Diameter | Working Pressure | L (Length) | H (Height) | A (Width) | Joint Connection Size |
|---|---|---|---|---|---|---|
| Z13Y-50-35 | 50 mm (2") | 35 MPa (5,000 psi) | 230 mm | 443 mm | 70.5 mm | TBG2-3/8" |
| Z13Y-75-35 | 75 mm (3") | 35 MPa (5,000 psi) | 270 mm | 633 mm | 98 mm | LP3" |
Data source: Technical data table.
Need a larger size? View the Z13Y-75-35 Soft Seal Mud Valve or explore the full Z13Y Soft Seal Series.
The exact footprint for the Z13Y-50-35 is:
These dimensions are critical for replacing existing valves in confined spaces. Verify your current L-dimension before ordering.
The Z13Y series utilizes a soft seal (rubber seat) design. The elastomer seat provides a tight shut-off with less operating torque compared to metal-seated valves. The internal thread (TBG 2-3/8") ensures a compact and secure connection. This design is ideal for standard mud service where a bubble-tight seal is prioritized.
Replacing an older TBG threaded mud valve? Here is what to verify:
The Z13Y-50-35 is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if TBG 2-3/8" is the right thread for your pipe? Our engineers can help. Tell us your pipe specifications, and we will verify the correct Z13Y model.
We supply replacement parts for the Z13Y-50 series, including rubber seats, gates, and stem packing kits. See our Mud Valve Parts page for compatible repair kits.
Q: Is this valve a hard seal or soft seal?
A: This Z13Y series is a soft seal (rubber seat) design, providing a tight shut-off for standard mud service.
Q: What is the thread type on the Z13Y-50-35?
A: It features a TBG 2-3/8" (Tubing) internal thread connection.
Q: What is the face-to-face length of this valve?
A: The overall length (L) is 230 mm.
Q: What is the typical lead time?
A: Standard lead time is 15-20 days. Contact us for expedited options.
For Z13Y-50-35 soft seal mud gate valve selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.