HYRIG can supply the Z13Y internal thread soft seal mud gate valve series and its replacement parts. The Z13Y series are manual, rising-stem gate valves with a rubber seat (soft seal) design, engineered for drilling mud service at pressures up to 5,000 psi (35 MPa). They feature internal thread connections (TBG 2-3/8" and LP 3") for direct integration into smaller pipe manifolds.
| Model Number | Nominal Diameter (mm) | Pressure (MPa) | L (mm) | H (mm) | A (mm) | Joint Connection Size |
|---|---|---|---|---|---|---|
| Z13Y-50-35 | 50 | 35 | 230 | 443 | 70.5 | TBG2-3/8" |
| Z13Y-75-35 | 75 | 35 | 270 | 633 | 98 | LP3" |
Data source: Technical data table.
This series is designed for threaded pipeline integration. The structural length (L) ranges from 230 mm for the 2" (TBG 2-3/8") model to 270 mm for the 3" (LP 3") model. Because these valves use internal threads, ensuring the correct thread pitch and engagement length is critical for a leak-free seal.
The Z13Y series utilizes a soft seal (rubber seat) design. Unlike metal-to-metal valves, the elastomer seat provides a bubble-tight seal at lower operating torques and is more forgiving of minor gate scratches. The internal thread connection allows for compact manifold designs. This soft seal design is ideal for standard drilling mud where extreme abrasiveness is not the primary concern, but zero-leak isolation is required.
Replacing an older threaded mud valve? Here is what to verify:
The Z13Y series is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if TBG 2-3/8" or LP 3" is the right fit? Tell us your existing pipe specifications, and our engineers will verify the exact Z13Y model for your system.
HYRIG provides replacement parts for the Z13Y series, including rubber seats, gates, and stem packing kits. See our Mud Valve Parts page for compatible repair kits.
Q: What does the "Z13" stand for?
A: The "13" indicates an internal thread (screwed) connection, as opposed to "23" which is a union connection.
Q: Does this valve use a soft seal or hard seal?
A: This series features a soft seal (rubber seat) design for tight shut-off.
Q: What is the difference between TBG and LP threads?
A: TBG stands for Tubing thread (API 5B), while LP stands for Line Pipe thread. They have different thread profiles and cannot be interchanged.
Q: What is the typical lead time?
A: Standard lead time is 15-20 days. Contact us for expedited shipping.
For Z13Y soft seal mud gate valve series selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.