| Model | Nominal Size | Max Flow (L/min) | Feedback Type | Hysteresis |
|---|---|---|---|---|
| 4WRA10 | DN10 | 95 | None | < 6% |
| 4WRE10 Valve | DN10 | 260 | Electrical (Sensor) | < 1% |
| 4WRA6 Valve | DN6 | 43 | None | < 6% |
Data source: Technical data table.
Mounting parameters for the 4WRA10 valve:
| Parameter | Specification |
|---|---|
| Mounting Interface | ISO 4401-05 (CETOP 5) |
| Bolt Pattern | 4 x M6 threaded holes (54 x 54 mm) |
| Port Connections | A, B, P, T (Requires O-ring 12 x 2 mm) |
| Body Width | 70 mm |
| Weight | 5.9 kg (2-position) / 7.5 kg (3-position) |
The 4WRA10 uses a proportional solenoid to push the spool against a spring. The spool stroke is proportional to the input current. It is an open-loop system.
`4WRA` + `10` + `Spool Type` + `10` + `Nominal Flow` + `Voltage` + `Connector`.
Example: `4WRA10E-10/20Z4` = DN10, Spool E, 27 L/min, DC 24V, Z4 connector.
Replacing an old proportional valve? Check:
Used in general machine tools, light industry, and mobile equipment for smooth directional control.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help selecting the correct spool type or amplifier? Contact our engineers with your system specifications.
Q: What is the max flow rate for the 4WRA10?
A: The 4WRA10 supports a maximum flow rate of 95 L/min.
Q: What is the difference between 4WRA6 and 4WRA10?
A: The 4WRA10 has a larger DN10 size, higher flow capacity, and uses the ISO 4401-05 mounting interface.
Q: Do I need a specific amplifier for the 4WRA10?
A: Yes, it requires an amplifier designed for the 10-size proportional valves, such as the VT-3014.
For 4WRA10 proportional directional valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.