| Model | Nominal Size | Max Flow (L/min) | Feedback Type | Hysteresis |
|---|---|---|---|---|
| 4WRA6 | DN6 | 43 | None | < 6% |
| 4WRE6 Valve | DN6 | 65 | Electrical (Sensor) | < 1% |
| 4WRA10 Valve | DN10 | 95 | None | < 6% |
Data source: Technical data table.
Mounting parameters for the 4WRA6 valve:
| Parameter | Specification |
|---|---|
| Mounting Interface | ISO 4401-03 (CETOP 3) |
| Bolt Pattern | 4 x M5 threaded holes (40.5 x 40.5 mm) |
| Port Connections | A, B, P, T (Requires O-ring 9.25 x 1.78 mm) |
| Body Width | 45 mm |
| Weight | 1.75 kg (2-position) / 2.5 kg (3-position) |
The 4WRA6 uses a proportional solenoid to push the spool against a spring. The spool stroke is proportional to the input current. It is an open-loop system, suitable for applications where high precision is not strictly required, but cost-effectiveness is important.
`4WRA` + `6` + `Spool Type` + `10` + `Nominal Flow` + `Voltage` + `Connector`.
Example: `4WRA6E-10/10Z4` = DN6, Spool E, 13 L/min, DC 24V, Z4 connector.
Replacing an old proportional valve? Check:
Used in general machine tools, light industry, and mobile equipment for smooth directional control.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help selecting the correct spool type or amplifier? Contact our engineers with your system specifications.
Q: What is the max flow rate for the 4WRA6?
A: The 4WRA6 supports a maximum flow rate of 43 L/min.
Q: Can I upgrade a 4WRA6 to a 4WRE6?
A: The mounting footprint is the same, but the 4WRE6 requires a different amplifier with feedback capability (e.g., VT-5005).
Q: What is the recommended filtration for this valve?
A: A filtration of <20 μm is required, but <10 μm is recommended to ensure good control performance and long life.
For 4WRA6 proportional directional valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.