Proportional Directional Valves | 4WRA, 4WRE & 4WRZ Series

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the proportional directional valve range and their spare parts. These valves control the flow rate and direction of hydraulic fluid proportionally to an electrical input signal. Choose from direct-operated (4WRA), electrically feedback (4WRE), or pilot-operated (4WRZ) variants.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Series: 4WRA (Direct), 4WRE (Direct with Feedback), 4WRZ (Pilot-operated).
  • Nominal Sizes: DN6, DN10, DN16, DN25, DN32.
  • Max Working Pressure: Up to 35 MPa.
  • Max Flow Rate: Up to 1600 L/min (4WRZ32).
  • Control Types: Open-loop or closed-loop electronic control.

Series Specifications & Model Comparison

SeriesNominal SizesMax Flow (L/min)Control TypeFeedback
4WRA SeriesDN6, DN1095Direct-operatedNo
4WRE SeriesDN6, DN10260Direct-operatedYes (Sensor)
4WRZ/4WRH SeriesDN10 to DN321600Pilot-operatedNo (Main spool)

Data source: Technical data table.

Structure / Working Principle

  • 4WRA: A proportional solenoid directly pushes the spool. The spool position is determined by the magnetic force and the spring force.
  • 4WRE: A position sensor measures the spool position and sends a feedback signal to the amplifier, ensuring precise spool positioning regardless of flow forces.
  • 4WRZ: A small pilot valve (3DREP6) controls the pressure acting on the main spool, allowing for high-flow control with a relatively small solenoid.

Applications

Used in applications requiring precise speed or position control under varying loads, such as injection molding machines, machine tools, and hydraulic presses.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Need help choosing between direct-operated and pilot-operated valves? Contact our engineers with your system specifications.

Frequently Asked Questions

Q: What is the difference between 4WRA and 4WRE?
A: 4WRA is an open-loop valve without a position sensor. 4WRE is a closed-loop valve equipped with an inductive position sensor for higher precision and lower hysteresis.

Q: What is the maximum flow rate of the 4WRZ series?
A: The 4WRZ32 (DN32) supports a maximum flow rate of up to 1600 L/min.

Q: Which amplifier is recommended for the 4WRE series?
A: The VT-5000 series amplifiers (e.g., VT-5005 for 4WRE6, VT-5006 for 4WRE10) are specifically designed for these valves.

Contact

For proportional directional valve selection and spare parts, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit