This page provides technical specifications for the 9703320000 Lower IBOP when used with the BPM DQ50BSC top drive. Specifications are based on Beijing Petroleum Machinery factory documentation and API standards for inner blowout preventers.
| Parameter | Value | Unit |
|---|---|---|
| Working Pressure | 5,000 | psi (34.5 MPa) |
| Shell Test Pressure | 7,500 | psi (51.7 MPa) |
| Seat Test Pressure (high) | 5,000 | psi (34.5 MPa) |
| Seat Test Pressure (low) | 500 | psi (3.4 MPa) |
| Parameter | Value |
|---|---|
| Bore Diameter | Full bore (matches drill string ID) |
| Top Connection | API IF thread (mates to upper IBOP) |
| Bottom Connection | API IF thread (to saver sub or drill pipe) |
| Body Type | Single ball valve |
| Component | Material |
|---|---|
| Body & End Pieces | High-strength alloy steel forging |
| Ball | Chrome-plated alloy steel |
| Seats | Thermoplastic with NBR energizer |
| Stem Seals | NBR O-rings |
| Condition | Min | Max |
|---|---|---|
| Ambient / Fluid | -20°C (-4°F) | 121°C (250°F) |
| Connection | Recommended Torque |
|---|---|
| Lower IBOP to upper IBOP | Per BPM factory specification |
| Lower IBOP to saver sub / drill pipe | Per drill pipe manufacturer |
API Spec 7 – Rotary drilling equipment specifications
API Spec 7K – Drilling and well servicing equipment
API Spec 8C – Drilling and production hoisting equipment (PSL1, PSL2)
API Q1 – Quality management system
| Test Type | Pressure | Hold Time | Acceptance Criteria |
|---|---|---|---|
| Low-pressure seat | 500 psi | 5 min | No visible leakage |
| High-pressure seat | 5,000 psi | 5 min | No pressure drop |
| Shell (body) | 7,500 psi | 5 min | No structural leakage |
| Operational | Atmospheric | 3 cycles | Smooth operation |
The 9703320000 Lower IBOP is designed and manufactured under the following quality and technical standards:
GB/T19001:2000 idt ISO9001:2000 – Quality management system
API Spec Q1 – Oil and gas industry quality program
API Spec 7 – Rotary drilling equipment
API Spec 7K – Drilling and well servicing equipment
API Spec 8C – Drilling and production hoisting equipment
All products are manufactured at Beijing Petroleum Machinery Factory under strict quality control procedures. The IBOP undergoes factory testing before shipment, with test documentation available upon request.
For 2D/3D CAD drawings, material test reports, or API compliance certificates: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.