The Oriented Straight Sub and Oriented Bent Sub are critical components in directional drilling assemblies. The Straight Sub primarily functions to house and orient the directional survey instrument (clinometer) within its sleeve, ensuring accurate toolface readings. It cooperates directly with the Bent Sub and mud motor. The Oriented Bent Sub is a key deflection tool that introduces a fixed bend angle into the bottom hole assembly (BHA). This bend, when oriented correctly, causes the mud motor to exert a continuous lateral force on the drill bit, enabling controlled deviation from the original well path. This system is used for various operations including initial well deflection, adjusting azimuth, side-tracking existing wells, and correcting the trajectory of vertical wells. Their simple construction, ease of use, and relatively low cost make them indispensable for achieving precise directional control.
Oriented Straight Sub - Technical Specifications
| OD | ID | OAL | Connection |
|---|---|---|---|
| mm (inch) | mm (inch) | mm (inch) | |
| 104.8 (4-1/8) | 44.5 (1-3/4) | 800 (31-1/2) | NC31 B×P |
| 120.7 (4-3/4) | 57.2 (2-1/4) | 900 (35-7/16) | NC38 B×P |
| 165 (6-1/2) | 71.4 (2-13/16) | 950 (37-13/32) | NC50 B×P |
| 197 (7-3/4) | 71.4 (2-13/16) | 610 (24) | 6-5/8 REG B×P |
| 203.2 (8) | 71.4 (2-13/16) | 1000 (39-3/8) | 6-5/8 REG B×P |
Oriented Bent Sub - Technical Specifications
| OD | ID | Bent Angle | Connection |
|---|---|---|---|
| mm (inch) | mm (inch) | ||
| 104.8 (4-1/8) | 32 (1-1/4) | 1°, 1.5°, 2° | NC31 B×P |
| 120.7 (4-3/4) | 50.8 (2) | 1°, 1.5°, 2° | NC38 B×P |
| 152 (5-63/64) | 71.4 (2-13/16) | 1°, 1.5°, 2° | NC46 B×P |
| 165 (6-1/2) | 71.4 (2-13/16) | 1°, 1.5°, 2°, 2.5° | NC50 B×P |
| 197 (7-3/4) | 71.4 (2-13/16) | 1°, 1.5°, 2°, 2.5° | 6-5/8 REG B×P |
| 203.2 (8) | 71.4 (2-13/16) | 1°, 1.5°, 2°, 2.5° | 6-5/8 REG B×P |
Key Features:
Enables precise wellbore trajectory control
Works with bent housing motors for directional drilling
Simple structure, easy to use, low cost
Used for deflecting, azimuth control, side-tracking, and correction
Available in multiple bend angles (1° to 2.5°)
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.