The Wear Sub is an essential drilling tool engineered to address the pervasive problem of friction and wear between the rotating drill string and the stationary casing. During drilling operations, this contact leads to rapid degradation of both components.
The sub incorporates a unique design featuring a sturdy body housing a highly wear-resistant rubber sleeve. This sleeve is mounted with a clearance that allows it to rotate freely. Its outside diameter is strategically larger than that of the standard tool joints, ensuring it becomes the primary point of contact with the casing wall. As drilling proceeds, the rubber sleeve rotates independently, absorbing the abrasive forces. The combination of its wear-resistant material and softness drastically reduces the overall friction and wear. By employing a Wear Sub at strategic positions in the Bottom Hole Assembly (BHA), operators can effectively protect their drill string and casing, leading to safer operations and substantial cost savings.
Specifications - Wear Sub
| For Casing Size | Body O.D. (mm) | Sub O.D. (Sleeve) (mm) | I.D. (mm) | Connection Type |
|---|---|---|---|---|
| 7" | 121 | 143 | 38.1 | 3 1/2 IF |
| 168 | 190 | 71.4 | 4 1/2 IF | |
| 9 5/8" | 178 | 197 | 71.4 | 5 1/2 FH / 4 1/2 IF |
| 10 3/4" | 180 | 225 | 71.4 | 5 1/2 FH |
| 13 3/8" | 203 | 285 | 71.4 | 5 1/2 FH |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.