An ammonia brine circulation pump (also known as an ammoniated brine pump or NH₃/NaCl solution pump) is a critical process pump in soda ash manufacturing plants using the ammonia‑soda process (Solvay process) or Hou`s process (combined process). Ammoniated brine is prepared by mixing concentrated brine (NaCl solution) with ammonia, which is then pumped to carbonating towers where the reaction with carbon dioxide produces sodium bicarbonate and ammonium chloride.
This fluid presents unique pumping challenges: high chloride concentration (prone to pitting corrosion), ammonia content (toxic, corrosive to copper‑based alloys), potential for crystallization if temperature drops, and medium temperatures (40‑80°C) typical in carbonating sections. Our API 610 ammonia brine circulation pumps are specifically designed for these demanding conditions, fully compliant with API 610 11th/12th edition (ISO 13709) – ensuring 20‑year design life and minimum 3‑year uninterrupted operation.
The pump is suitable for pumping mineral acid solutions, organic acid solutions, brines, petrochemical solutions, organic compounds and other corrosive raw materials and products. It is mainly used in multiple evaporation and MVR evaporation processes, refineries, petrochemical, coal chemical, low temperature projects, power plants, and environmental protection industries.
| Pump Type | API 610 Type | Best Application |
|---|---|---|
| OH2 | Overhung, centreline‑mounted, single‑stage | Standard ammonia brine circulation from absorption section to carbonating towers (heads ≤150 m) |
| BB3 | Axially split, single casing, multistage, between bearings | High‑head ammoniated brine transfer to elevated carbonating towers or long‑distance transfer (heads up to 400 m) |
| VS4/VS6 | Vertical suspended sump or barrel | Suction from sumps or when low NPSH is required |
The ZE series petrochemical process pump, which conforms to API610 standard, is particularly suitable for pumping brines, mineral acid solutions, organic acid solutions, petrochemical solutions, organic compounds and other corrosive raw materials and products.
Single‑stage overhung impeller, centreline mounted – accommodates moderate thermal expansion.
Back pull‑out design – rotating assembly removable without disturbing suction or discharge piping.
Heavy‑duty API 610 bearing housing; L10 bearing life ≥25,000 hours.
Flow range: 10 – 600 m³/h; head range: 10 – 150 m (higher with larger frames).
Double volute casing on larger sizes to balance radial thrust.
The ZE API OH2 Process Pump features enlarged shaft diameter with shafting stability coefficient L³/D⁴ = 9.3–83, small mechanical seal flexibility (axial shaft movement <0.05mm), impeller precision casting with dynamic balance up to G2.5, and high universalization and standardization for easy spare parts management.
Horizontal, single‑casing, axially split, centreline‑mounted, between‑bearings centrifugal pump.
Opposed (back‑to‑back) impellers – axial thrust self‑balanced without complex balance devices. This design is especially good for transferring liquids which may contain particles.
Radially force is self‑balanced by volute type flow channels symmetrically arranged along the centre line.
Flow range: 10 – 1,600 m³/h; head up to 1,600 m; temperature range –80 to +200°C; pressure up to 25 MPa.
Suction and discharge are cast with casing – rotor can be easily maintained without dismounting suction and discharge pipelines, reducing shutdown downtime.
Typical application: Ammonia plant lean solution pump, ammonia plant rich solution pump.
| Parameter | OH2 | BB3 |
|---|---|---|
| Flow range | 10 – 600 m³/h | 10 – 1,600 m³/h |
| Head range | 10 – 150 m (up to 260 m with larger frame) | Up to 1,600 m |
| Max temperature | –80 to +200°C | –80 to +200°C |
| Pressure rating | Up to 7.5 MPa | Up to 25 MPa |
| Speed | 1,450 / 2,950 rpm | 1,450 / 2,950 rpm |
| Specific gravity | ≤1.85 | ≤1.85 |
Ammoniated brine is particularly aggressive because chloride ions (Cl⁻) can cause pitting in stainless steels, while ammonia (NH₃) attacks copper alloys. Material selection must address both concerns.
| Component | Recommended Material | API 610 Class |
|---|---|---|
| Casing | 316L stainless steel (CF3M) | S‑8 |
| Impeller | 316L stainless steel | S‑8 |
| Shaft | 316 stainless steel or 17‑4 PH | A‑8 / C‑6 |
| Wear rings | 316L SS + Stellite hard‑faced | – |
| Gaskets / O‑rings | PTFE or Viton (FKM) | – |
| Fasteners | 316 stainless steel | – |
To reliably pump ammoniated brine, it is recommended to use 316L stainless steel pumps with enhanced corrosion resistance. 316L contains molybdenum (2‑3%), which significantly improves resistance to pitting and crevice corrosion caused by chlorides. When pumping ammoniacal brine, 316L stainless steel offers good resistance, whereas carbon steel suffers from general corrosion and pitting attack.
Copper and copper alloys (brass, bronze) – ammonia is corrosive to copper‑based materials. Do not use copper alloys in wetted parts.
Carbon steel – rapid pitting and general corrosion in chloride‑containing brine.
304 stainless steel – less resistant to chloride pitting than 316L; not recommended for prolonged contact with concentrated brine.
Mechanical seals are upgraded to single‑face mechanical seals for reliable operation. Shaft sealing conforms to API 682 2nd edition standard.
Ammonia is toxic, and ammoniated brine also has an unpleasant odor. Sealing integrity is critical to prevent fugitive emissions and environmental contamination.
| Seal Arrangement | API 682 Plan | Application |
|---|---|---|
| Single seal with internal flush | Plan 11 | Acceptable for low‑pressure, non‑toxic sections – not recommended for high‑concentration ammonia service |
| Dual pressurised seal (Arrangement 3) | Plan 53B | Recommended – zero emissions; bladder‑accumulator barrier fluid system prevents ammonia leakage to atmosphere |
| API 685 sealless (canned motor or magnetic drive) | N/A | Zero leakage with no dynamic seals; ideal for ammonia‑containing hazardous fluids |
Plan 53B is a piping plan which pressurizes the barrier fluid with a nitrogen‑charged bladder accumulator – the pressurized bladder acts directly on the barrier fluid, pressurizing the entire sealing system. This arrangement ensures barrier fluid pressure is always higher than process pressure, preventing any ammonia‑brine mixture from leaking to atmosphere.
For high‑concentration ammonia service (>25%), API 685 sealless (canned motor) pumps are strongly recommended. Canned motor pumps have stator and rotor separated by non‑magnetic corrosion‑resistant thin‑walled sleeves, with rotor supported by front and rear bearings and immersed in the conveying medium. Only static seals exist on the pump casing, enabling completely leak‑free operation.
The Marelli OH1 pump provides API‑610 11th Edition/ISO 13709 full compliance and offers a wide choice of impellers for optimum efficiency. It is suitable for amine and sour water services in refinery and petrochemical applications.
Ammonia brine circulation pumps typically take suction from absorption vessels where the liquid is near‑saturated with ammonia gas, so available NPSH may be limited.
Low suction specific speed design with wide choice of impellers for optimum efficiency over a large operating range.
Inducer option – reduces NPSHr by 40‑60% for problematic suction conditions.
Maintain NPSHa ≥ NPSHr + 1.0 m per API 610.
Available NPSHa must be calculated at bubble point – do not assume subcooling, as ammonia‑saturated brine has a high tendency to flash.
During process startups, shutdowns, or low demand periods, pump flow can drop below Minimum Continuous Stable Flow. An automatic recirculation valve (ARC) must be installed to protect the pump from overheating, vibration, and seal damage. Alternatively, a continuous bypass orifice can be used.
| Industry | Process Step | Fluid | Configuration |
|---|---|---|---|
| Soda ash (Hou's process / Solvay process) | Ammoniated brine preparation to carbonating tower | NH₃ + NaCl + H₂O | OH2 (standard) or BB3 (elevated towers) |
| Ammonia plant | Lean solution circulation | Lean ammonia solution | BB3 multistage |
| Fertilizer plants | Ammonium chloride processing | NH₄Cl brine | OH2 or VS4 materials(316L SS) |
| Chlor‑alkali industry | Brine circulation | NaCl brine | OH2 (316L or duplex) |
| Refinery/petrochemical | Sour water and amine services | Ammonia‑laden water | OH1/OH2 (API 610) |
In Hou's process (also known as China's combined process for soda ash production), ammoniated brine is the key intermediate. Concentrated ammoniacal brine is prepared and pumped to carbonating towers where carbon dioxide is introduced – the whole process relies on reliable brine circulation. In refining applications, the pump can be used for amine and sour water services.
Design life: 20 years minimum
Continuous operation: Minimum 3 years uninterrupted service
Bearing life: L10 ≥25,000 hours
Critical speed: First lateral critical speed ≥120% of maximum operating speed
Centreline mounting (OH2/BB3) – accommodates thermal expansion
Hydrostatic test: 1.5x design pressure
Performance test: Water per API 610 Grade 2 or Grade 1
Material certification: EN 10204 3.1 full traceability
Patented non‑contact and non‑sparking oil sealing – prevents water ingress into oil reservoir; monitoring system available to measure pump vibration, bearing temperature, inlet/outlet pressure, flow, and driving end load
Full API 610 compliance – OH2 and BB3 types covering the entire soda ash process circulation duty.
316L stainless steel wetted parts – resists chloride pitting and ammonia corrosion (proven in brine, mineral acid, and organic acid service).
API 682 Plan 53B dual seals – zero ammonia emissions; nitrogen‑charged bladder accumulator ensures barrier fluid pressure > process pressure.
API 685 sealless (canned motor) option – ultimate zero‑leakage solution for high‑concentration ammonia service.
Low NPSH design – inducer option, low suction specific speed hydraulics.
Centreline mounting (OH2/BB3) – maintains alignment during moderate temperature cycles.
Back pull‑out (OH2) or axial split (BB3) design – easy maintenance without removing piping.
Minimum flow protection – ARC or bypass integrated.
Material upgrade options – duplex stainless steel (D‑1/D‑2) for extra high chloride resistance, NACE MR0175 for sour service.
Field proven – thousands of API 610 pumps installed in soda ash plants, ammonia refrigeration, and chemical process facilities.
| Component | Recommended Quantity |
|---|---|
| Mechanical seal cartridge (API 682 Plan 53B ready) | 1 set |
| Bearing set (radial + thrust) | 1 set |
| Wear ring set (casing + impeller) | 1 set |
| Gasket / O‑ring kit (full set) | 1 set |
| Inducer (if fitted) | 1 set |
For detailed selection of the correct ammonia brine circulation pump – including flow and head requirements, brine concentration and temperature, NPSHa calculation, material selection (316L SS vs. duplex for high chloride), API 682 seal plan (Plan 53B for ammonia emission control), and complete API 610 data sheet – please contact our engineering team.
Email: info@hyrig.com
Our engineers support soda ash production, ammonia processing, fertilizer, and chemical projects worldwide with reliable API 610 ammonia brine circulation pumps – corrosion‑resistant, zero‑emission, and built for 20‑year service.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.