The ANS/ANSZ series is a horizontal, single‑stage, end‑suction, top‑discharge centrifugal pump manufactured to ISO 2858 / DIN 24256 standards. It is widely used for transferring nitric acid (HNO₃) in fertilizer plants, metal pickling lines, and chemical processing facilities.
Key Parameters
Flow rate: Up to 2,000 m³/h
Total head: Up to 160 m
Working pressure: Up to 1.6 MPa / 16 bar
Operating temperature: -20°C to +150°C (acid dependent)
Speed: 1,450 / 2,900 rpm (50 Hz)
Flange rating: PN16 / Class 150
Design Features
Back pull-out design – rotating assembly removable without disturbing piping
Closed impeller – dynamically balanced, renewable wear rings
Double volute casing (sizes ≥80mm) – balances radial hydraulic forces
ISO 2858 compliant dimensions – interchangeable with standard chemical pumps
API 682 seal chamber – accepts single, tandem, or double cartridge seals
Heavy duty bearing bracket – oil ring self‑lubricating
Materials for Nitric Acid Service
| Concentration | Temperature | Recommended Material |
|---|---|---|
| ≤30% ambient | 304L or 316L SS | |
| 30-70% ambient | 316L SS | |
| Concentrated (≤98%) ≤40°C | 316L or 904L | |
| Concentrated (≤98%) ≤80°C | High silicon stainless steel (SS920/SS940) | |
| Fuming red nitric acid | Hastelloy / titanium |
Copper‑bearing alloys are NOT suitable. All wetted parts shall be copper‑free.
Seal & Flush Plans
Dilute/cold acid: Single mechanical seal, Plan 11
Concentrated/hot acid: Tandem seal, Plan 52 (buffer fluid)
Fuming / toxic service: Double seal, Plan 53B (pressurized barrier fluid)
Seal faces: Silicon carbide vs. carbon (standard); tungsten carbide for higher severity
Secondary seals: PTFE or FFKM (Kalrez) – EPDM and Buna‑N are NOT suitable
Applications
Nitric acid transfer in CAN (calcium ammonium nitrate) plants
Acid feed to neutralization reactors
Concentrated acid loading/unloading
Metal pickling acid circulation
Nitration process feed
Why ANS/ANSZ for Nitric Acid?
ISO 2858 standard – readily available spares
Multiple corrosion resistant alloys – 316L, high silicon SS, 904L
Back pull‑out maintenance – minimal downtime
API 682 seal chamber – zero leakage options
Cost‑effective alternative to API 610 pumps
China manufacturer – short lead time, local support
For more information, contact us at info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.