The ANS/ANSZ series is a horizontal, single‑stage, end‑suction, top‑discharge centrifugal pump manufactured to ISO 2858 / DIN 24256 standards. It is designed for general chemical processing, process circulation, cooling water, and utility fluid transfer in refineries, chemical plants, and industrial facilities.
Key Parameters
Flow rate: Up to 2,000 m³/h
Total head: Up to 160 m
Working pressure: Up to 1.6 MPa / 16 bar
Operating temperature: -20°C to +150°C
Speed: 1,450 / 2,900 rpm (50 Hz)
Flange rating: PN16 / Class 150
Design Features
Back pull-out design – rotating assembly removable without disturbing piping
Closed impeller – dynamically balanced, renewable wear rings
Double volute casing (sizes ≥80mm) – balances radial hydraulic forces
ISO 2858 dimensions – interchangeable with other standard chemical pumps
API 682 seal chamber – accepts single, tandem, or double cartridge seals
Heavy duty bearing bracket – oil ring self‑lubricating
Materials
| Component | Standard | Upgrade |
|---|---|---|
| Casing | Cast iron / Carbon steel | 304SS / 316L SS |
| Impeller | Cast iron / 12% Cr | 304SS / 316L SS |
| Shaft | AISI 4140 | 17-4PH / 316 SS |
Seal & Flush Plans
Clean water / mild service: Single mechanical seal, Plan 11
Warm fluid (>80°C): Single seal with cooler, Plan 21/23
Zero‑leak requirement: Tandem seal, Plan 52
Applications
Process fluid circulation in chemical plants
Cooling water circulation (heat exchangers, cooling towers)
Light hydrocarbon transfer
Industrial water supply
Boiler feed water (low pressure)
Why ANS/ANSZ for Process Circulation?
ISO 2858 standard – spares availability, easy interchangeability
Back pull‑out design – low maintenance downtime
Wide hydraulic coverage – up to 2,000 m³/h, 160 m head
Cost‑effective OH2 pump for non‑API services
China manufacturer – competitive price, short lead time
For more information, contact us at info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.