ANS/ANSZ Ammonia Water Pump – ISO 2858 Standard Chemical Pump

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
ANS/ANSZ horizontal single-stage end-suction chemical pump conforming to ISO 2858 (OH2 hydraulic coverage). For ammonia water (aqueous ammonium hydroxide) transfer in fertilizer plants, chemical processing, and water treatment. Flow to 2,000 m³/h, head to 160 m, pressure to 1.6 MPa, temperature -20 to +150°C. Back pull-out design, closed impeller, API 682 seal chamber. Materials: 316L stainless steel (copper-free), optional duplex. Single mechanical seal Plan 11 or double Plan 53B for zero emissions.

Conatct For Details
DetailReview(0)Additional

The ANS/ANSZ series is a horizontal, single‑stage, end‑suction, top‑discharge centrifugal pump manufactured to ISO 2858 / DIN 24256 standards. It provides OH2 type hydraulic coverage (overhung, foot‑mounted) for general chemical and petrochemical service. For ammonia water (aqueous ammonium hydroxide, NH₃·H₂O / NH₄OH) transfer, the ANS pump offers reliable, corrosion‑resistant operation.

Key Parameters

  • Flow rate: Up to 2,000 m³/h

  • Total head: Up to 160 m

  • Working pressure: Up to 1.6 MPa / 16 bar

  • Operating temperature: -20°C to +150°C

  • Speed: 1,450 / 2,900 rpm (50 Hz)

  • Flange rating: PN16 / Class 150

Design Features

  • Back pull-out design – rotating assembly removable without disturbing piping

  • Closed impeller – dynamically balanced, renewable wear rings

  • Double volute casing (sizes ≥80mm) – balances radial hydraulic forces

  • ISO 2858 compliant dimensions – interchangeable with other standard chemical pumps

  • API 682 seal chamber – accepts single, tandem, or double cartridge seals

  • Heavy duty bearing bracket – oil ring self‑lubricating

  • Optional inducer – improves low NPSH performance

Materials (Ammonia Water Service)

All wetted components shall be copper‑free.

ComponentStandardUpgrade
CasingCF8M (316 SS)CF3M (316L SS) / Duplex
ImpellerCF8M (316 SS)316L SS / Duplex
Shaft17-4PH or 316 SSDuplex
Wear ringsHardened 12% CrStellite facing
Gaskets / O‑ringsEPDM or PTFEFFKM (Kalrez)

Seal & Flush Plans

  • Clean ammonia water (<50°C, non‑hazardous): Single mechanical seal, Plan 11

  • Hot ammonia water (>50°C): Single seal with cooler, Plan 21 or Plan 23

  • Zero‑leak requirement (fugitive emission control): Tandem seal, Plan 52

  • Corrosive / toxic service: Double seal, Plan 53B (pressurized barrier fluid)

Applications

  • Ammonia water transfer in fertilizer plants

  • Aqueous NH₃ circulation in chemical processing

  • pH neutralization feed pumps in water treatment

  • Ammonium hydroxide supply in metal treatment

  • Temporary ammonia injection in power plant SCR systems

Why ANS/ANSZ for Ammonia Water?

  • ISO 2858 standard – widely used, readily available spares

  • Copper‑free 316L construction – compatible with ammonia water

  • Back pull‑out maintenance – minimal downtime

  • API 682 seal options – zero leakage capability

  • Cost‑effective alternative to full API 610 pumps

  • China manufacturer – short lead time, local support

For more information, contact us at info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit