The DG series is a horizontal, double casing (barrel type), radially split, multistage centrifugal pump manufactured in full compliance with API 610 (ISO 13709). It is specifically designed for high pressure liquid ammonia feed service in green ammonia synthesis loops, urea plants, and fertilizer complexes.
Key Parameters
| Parameter | DG Series Range |
|---|---|
| Flow rate (Q) | 15 – 750 m³/h (standard); extended range 5-1,200 m³/h |
| Total head (H) | 300 – 3,300 m |
| Design pressure | Up to 35 MPa / 350 bar |
| Operating temperature | -80°C to +450°C |
| Speed | Up to 3,600 rpm |
| Flange rating | ASME Class 600 / 900 / 1500 |
Design Features
Double casing (barrel) construction – outer forged steel barrel provides primary pressure containment; inner radially split diffuser-type casing houses impellers
Back-to-back (opposed) impeller arrangement – provides inherent axial thrust self-balancing; eliminates balance drum/disks; specially suited for low density fluids like liquid ammonia where rotor stability is critical
Up to 16 stages – achieves required high head for ammonia synthesis pressure (15 MPa / 150 bar)
Double suction first-stage impeller – significantly reduces NPSH required, critical for ammonia feed from storage under limited submergence
Centerline mounting – uniform thermal expansion accommodates ammonia temperature (-33°C to +40°C)
Cartridge pull-out design – complete internal rotating assembly removable without disturbing outer barrel or piping; reduces maintenance downtime
API 682 seal chamber – accommodates Plan 53B double mechanical seals
Heavy duty bearings – oil ring self-lubricating; water-cooled housings available
Materials of Construction (Liquid Ammonia Service)
| Component | Standard | Upgrade |
|---|---|---|
| Outer barrel | Forged carbon steel (A216 WCB) | Forged 316L SS |
| Inner casing / diffusers | 316L stainless steel | Duplex 2205 / super duplex 2507 |
| Impellers | 316L stainless steel (back-to-back) | Duplex / super duplex |
| Shaft | 17-4PH stainless steel | Duplex / Inconel 718 |
| Wear rings / bushings | 316L with Stellite hard facing | Silicon carbide / tungsten carbide |
| Gaskets / O‑rings | PTFE | FFKM (Kalrez) |
For liquid ammonia service, 316L provides adequate corrosion resistance when anhydrous. Do NOT use brass, bronze, copper, or copper alloys.
Seal & Flush Plan – API 682 Plan 53B
Ammonia is toxic and hazardous. Zero leakage to atmosphere is mandatory:
Seal arrangement: Double mechanical seal (pressurized, Arrangement 3)
Flush Plan: Plan 53B – Pressurized barrier fluid reservoir with bladder accumulator (barrier fluid pressurized 1-3 bar above pump suction pressure)
Inner seal faces: Tungsten carbide vs. carbon (for non-lubricating ammonia)
Outer seal faces: Silicon carbide vs. carbon
Secondary seals: FFKM (Kalrez) – EPDM and Buna-N are NOT suitable for anhydrous ammonia
Auxiliary Systems
Minimum flow protection – automatic recirculation valve (ARC) prevents overheating
Bearing cooling – water-cooled housings recommended for continuous duty
Baseplate – heavy duty fabricated steel, epoxy grouted, designed to 2× API 610 nozzle loads
Coupling – flexible spacer type for removal without moving driver
Monitoring Systems (API 670)
Bearing temperature – RTD (PT100) in both bearing housings; 4-20 mA to DCS; alarm at 85°C, trip at 95°C
Vibration monitoring – proximity probes (eddy current) for shaft radial displacement; accelerometers for bearing housing velocity
Suction pressure – pressure transmitter with low suction pressure interlock to protect against NPSH violation
Discharge pressure – pressure transmitter with high limit alarm to DCS
Process temperature – thermowell-mounted temperature transmitter on suction nozzle
Applications
High pressure liquid ammonia feed pump for green ammonia synthesis loop (15MPa / 150 bar)
Ammonia charge pump in urea production
Carbamate feed pump (with super duplex upgrade)
Boiler feed water (carbon steel construction)
High pressure water injection and pipeline transport
Why Choose DG BB5 for High Pressure Ammonia?
Full API 610 12th Edition (ISO 13709) Type BB5 compliance – heavy duty, 20+ year design life
Opposed impeller arrangement – ensures rotor stability on low-density liquid ammonia, eliminating balance drum wear common in conventional designs
Double casing (barrel) design – provides two independent pressure containment barriers against hazardous ammonia leakage
Double suction first stage – reduces NPSH requirement for marginal suction conditions
API 682 Plan 53B double seals – zero atmospheric leakage of toxic ammonia
316L / duplex / super duplex material offering – matches ammonia corrosion resistance requirements
China manufacturing – competitive cost, quality assurance, spare parts support
Summary Table
| Parameter | Specification |
|---|---|
| Pump Type | API 610 Type BB5 – double casing (barrel), radially split, multistage, between bearings |
| Design code | API 610 12th Edition (ISO 13709) |
| Medium | Liquid ammonia (anhydrous NH₃) |
| Typical duty | 40°C / 15 MPa |
| Flow range | 15 – 750 m³/h (up to 1,200 m³/h options) |
| Head range | 300 – 3,300 m |
| Temperature | -80°C to +450°C |
| Pressure rating | Up to 35 MPa / 350 bar |
| Impeller arrangement | Opposed (back-to-back) – axial thrust self-balancing |
| Stages | Up to 16 |
| Casing | Double casing – outer forged barrel, inner radially split diffuser-type |
| Flange orientation | Top‑top or top‑side |
| Materials | Outer barrel: carbon steel / forged SS316L; Inner casing: 316L / duplex / super duplex |
| Seals | API 682 double mechanical seal, Plan 53B |
| Seal faces | Tungsten carbide vs. carbon (inner); SiC vs. carbon (outer) |
| Secondary seals | FFKM (Kalrez) |
| Lubrication | Oil ring self-lubricating (standard); forced oil (high power) |
| Mounting | Centerline mounted |
| Maintenance | Cartridge pull-out design (full rotor removal without disturbing barrel or piping) |
| Certification | API 610 12th Edition / ISO 13709 / NACE |
For more information or a custom proposal for your high pressure ammonia pump (DG BB5) application, contact us at info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.