The LY series is a vertical, single‑stage, single‑suction, volute type, long shaft submerged centrifugal pump manufactured to API 610 11th Edition Type VS4. It is designed for lifting geothermal wastewater, brine, and high temperature corrosive liquids from sumps, pits, and collection basins in geothermal power plants and industrial facilities.
Key Parameters
Flow rate: 3 – 2,600 m³/h
Total head: 5 – 250 m
Operating temperature: -20°C to +120°C (LY) / up to +400°C (LYG high temperature version)
Design pressure: Up to 5.0 MPa
Immersion depth: Up to 7 m (longer custom available)
Design Features
Submerged impeller and volute – always primed, no suction lift issues
Double volute casing (sizes ≥80mm) – balances radial hydraulic forces, reduces shaft deflection
Open or closed impeller – open impeller handles small solids and scale deposits typical in geothermal brine
Long line shaft with multi‑point sliding bearings – supports deep sump operation
Steam jacket option – prevents crystallization or solidification of high‑TDS brine when pump idle
No submerged dynamic seal – top stuffing box or API 682 seal optional for emission control
Discharge column with flanged sections – easy assembly and maintenance
Materials (Geothermal Wastewater)
Standard: 316L stainless steel for wetted parts (resists chlorides up to moderate levels)
Upgrade: Duplex 2205 or super duplex 2507 for high chloride geothermal brines
Shaft: AISI 416 or 17‑4PH stainless steel
Sliding bearings: PTFE‑lined bronze or silicon carbide (for abrasive service)
Seal & Flush Plans
No bottom seal (standard) – leakage prevented by column pipe
Top stuffing box (optional) – for emissions control
API 682 single or tandem seal (upon request) – Plan 11 or Plan 52
Applications
Geothermal plant wastewater sump lift
Geothermal brine reinjection pit drainage
High temperature condensate collection
Corrosive hot water transfer in chemical plants
Mine dewatering with elevated temperature water
Why LY for Geothermal Wastewater?
API 610 VS4 compliant – heavy duty for continuous geothermal service
Submerged design – reliable under low NPSH and variable sump levels
Corrosion resistant alloys – 316L, duplex for aggressive brine
High temperature option – LYG series handles up to 400°C
Steam jacket available – prevents scaling and salt deposition
China manufacturer – competitive lead time, spare parts support
For more information, contact us at info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.