HYRIG can supply API 609 triple offset butterfly valves. Because the valve involves specific geometric offsets, a metal seat, and torque-seated sealing, the RFQ must explicitly state these features to avoid receiving a standard soft-seated butterfly valve.
To receive an accurate quote, include the following data in your RFQ:
| Data Field | Why It Is Needed |
|---|---|
| Size & Pressure Class | Defines the flange dimensions and body thickness. |
| Body Style (Wafer/Flanged) | Determines the face-to-face length and installation method. |
| Temperature & Medium | Confirms if a metal seat or soft seat is required. |
| Geometry | Specify "Triple Offset" to ensure zero-friction operation. |
| Seat Construction | Specify "Metal-to-Metal" or "Metal Seated". |
| Fire-Safe Requirement | State if API 607 certification is required. |
| Actuator Data | Provide required torque (seating torque) for automation. |
| Dimension | Standard |
|---|---|
| Wafer face-to-face | API 609 Category B |
| Flanged face-to-face | API 609 short pattern |
| Flange drilling | ASME B16.5 / B16.47 |
A common error in butterfly valve RFQs is specifying only "API 609 butterfly valve." API 609 covers concentric, double-offset, and triple-offset designs, as well as soft and metal seats. A supplier could quote a soft-seated double-offset valve that meets the standard but fails in high-temperature or fire-safe service.
To ensure a triple-offset metal-seated valve, the RFQ must state both the geometry (triple offset) and the sealing construction (metal seat). If the valve is torque-seated, the actuator must be sized to provide the required seating torque, which is significantly higher than the running torque.
When preparing an RFQ for a replacement valve:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Q: Why can't I just specify "API 609 butterfly valve"?
API 609 covers multiple designs (concentric, double offset, triple offset) and seat types (soft, metal). You must specify the exact geometry and seat construction to get the correct valve.
Q: Does the RFQ need to specify the actuator torque?
Yes. Triple-offset valves are torque-seated. The actuator must be sized to provide the seating torque, which is higher than the torque required to operate the valve.
Q: What is the difference between Category A and Category B?
API 609 Category A (long pattern) and Category B (short pattern) refer to the face-to-face dimensions. Most triple-offset valves use the short pattern (Category B) for space-saving.
Q: What is the typical lead time?
Standard lead time is 4-6 weeks depending on size, class, and actuator requirements.
To ensure you receive the correct triple-offset valve, provide the line size, pressure class, temperature, body style, and actuator requirements. Our engineers will verify the RFQ against API 609.
For API 609 triple offset butterfly valve RFQ support, contact HYRIG: info@hyrig.com