HYRIG can supply API 609 triple offset butterfly valves. This FAQ addresses common engineering and procurement questions regarding installation, fire safety, and sealing performance.
Q: What is the preferred installation orientation for a triple offset butterfly valve?
The valve can be installed horizontally or vertically. For horizontal lines, the preferred orientation is with the shaft horizontal, especially in slurry service where solids could settle in the bottom of the bore.
Q: Is a triple offset butterfly valve fire-safe?
Yes. The metal-to-metal seat design provides inherent fire safety. The valve can be tested to API 607, ensuring that the metal seat maintains a seal even if the soft secondary components are destroyed.
Q: Is the seal bidirectional?
Yes. The torque-seated metal contact is designed to provide bidirectional zero-leakage shutoff, regardless of the flow direction.
Q: Can the valve be used for throttling?
Triple offset butterfly valves are designed for on/off isolation. While they can be used for throttling, the torque-seated geometry is optimized for the closed position. For severe throttling, a control valve is recommended.
Q: What is the difference between torque-seated and soft-seated?
A soft-seated valve relies on a flexible rubber or PTFE insert to compress and seal. A torque-seated valve relies on metal-to-metal contact generated by torque applied at the final closing point. Torque-seated valves handle much higher temperatures and are inherently fire-safe.
Q: What standards does the valve comply with?
Design to API 609 and ASME B16.34, face-to-face to API 609, flanged ends to ASME B16.5/B16.47, and testing to API 598.
Q: What is the typical lead time?
Standard lead time is 4-6 weeks depending on size, class, body style, and actuation requirements.
Q: Are material certificates provided?
Yes. EN 10204 3.1 material certificates for the body and trim can be provided upon request.
For specific questions regarding your triple offset butterfly valve installation or selection, provide the line size, pressure class, temperature, and medium. Our engineering team will confirm the specification.
For more information on API 609 triple offset butterfly valves, contact HYRIG: info@hyrig.com