HYRIG can supply the API 608 floating ball valve range. The NPS 4 Class 150 floating ball valve is a 2-piece bolted body valve with a PTFE seat and anti-blowout stem. It is widely used for general service in water, oil, and gas pipelines.
| Parameter | Value |
|---|---|
| Design Standard | API 608, ASME B16.34 |
| Size | NPS 4 (DN 100) |
| Pressure Class | Class 150 |
| Bore Diameter (d) | 100 mm |
| Face-to-Face (RF) | 229 mm |
| Face-to-Face (RTJ) | 242 mm |
| Height (H) | 250 mm |
| Handwheel Diameter (W) | 500 mm |
| Weight (Handwheel) | 29 kg |
| Dimension | Value |
|---|---|
| Face-to-Face (RF) | 229 mm |
| Face-to-Face (RTJ) | 242 mm |
| Flange Standard | ASME B16.5 |
| Butt Weld End | ASME B16.25 |
| Actuator Mounting | ISO 5211 |
The ball is free to float between the two seat rings. When closed, line pressure pushes the ball into the downstream seat, creating a seal. The seat ring is designed to provide reliable sealing at low pressure and to resist damage at higher pressure.
When replacing an existing NPS 4 Class 150 valve, verify: 1. Face-to-face dimension (229 mm RF). 2. Flange standard (ASME B16.5 Class 150). 3. Operating torque to confirm if the existing handle or actuator can be reused.
Need a reliable isolation valve for your pipeline? Share your line size and medium, and our engineers will confirm the correct floating ball valve model.
Q: What is the weight of the NPS 4 Class 150 valve?
The valve weighs approximately 29 kg with a handwheel operator.
Q: What is the face-to-face dimension?
The face-to-face dimension is 229 mm for RF ends and 242 mm for RTJ ends, conforming to ASME B16.10.
Q: Is the stem anti-blowout?
Yes. The stem is assembled from underneath and features a backseat design to prevent blowout.
Q: What is the typical lead time?
Standard lead time is typically 3 to 5 weeks depending on material.
For API 608 floating ball valve selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.