API 608 Floating Ball Valve | Class 150-1500 General Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the API 608 floating ball valve range. The API 608 floating ball valve is a quarter-turn isolation valve where line pressure pushes the ball against the downstream seat to create a
Conatct For Details
DetailReview(0)Additional

API 608 Floating Ball Valve

HYRIG can supply the API 608 floating ball valve range. The API 608 floating ball valve is a quarter-turn isolation valve where line pressure pushes the ball against the downstream seat to create a seal. It is widely used in general service pipelines for Class 150 to 1500 applications.

Key Facts

  • Valve Type: Floating ball valve
  • Pressure Class: Class 150 / 300 / 600 / 900 / 1500
  • Size Range: NPS 1/2 to NPS 10 (DN 15 to DN 250)
  • Design Standard: API 608, ASME B16.34, BS 5351
  • Bore Type: Full bore / Reduced bore
  • Seat Material: PTFE / Reinforced PTFE
  • Body Materials: ASTM A216 WCB, A351 CF8, CF8M
  • Fire-Safe: API 607

Key Specifications

ParameterClass 150Class 300Class 600Class 900Class 1500
Size RangeNPS 1/2-10NPS 1/2-8NPS 1/2-6NPS 1/2-2NPS 1/2-2
End ConnectionsRF, RTJRF, RTJRF, RTJRF, RTJRF, RTJ
Design2-piece bolted2-piece bolted2-piece bolted2-piece bolted2-piece bolted
Anti-StaticStandardStandardStandardStandardStandard

Dimensions

DimensionStandard
Face-to-Face (RF)ASME B16.10
Face-to-Face (RTJ)ASME B16.10
Flanged EndsASME B16.5
Butt-Weld EndsASME B16.25
Actuator MountingISO 5211

Structure / Working Principle

The ball is suspended and free to move within the valve body. When the valve is closed, line pressure pushes the ball downstream, pressing it against the seat ring. The elastic seat ring design ensures a tight seal at low pressure and provides a larger contact area at high pressure to prevent damage. The stem is designed with an anti-blowout structure and an anti-static device connects the ball to the stem.

Cross-Reference & Replacement

When replacing a floating ball valve, verify: 1. Face-to-face dimension to match existing piping. 2. Pressure class and material to ensure compatibility with the medium. 3. Operating torque to confirm if the existing manual handle or actuator can be reused.

Applications

  • General pipeline isolation: Suitable for water, oil, and gas lines at lower pressure classes.
  • Chemical injection systems: PTFE seats offer good chemical resistance.
  • Small-bore manifolds: Compact 2-piece design saves installation space.
  • Utility stations: Reliable shutoff for plant air and water systems.

Selection Support

Need help sizing a floating ball valve for your pipeline? Provide the line size, pressure rating, and medium, and our engineers will confirm the model and seat material.

Frequently Asked Questions

Q: What is the maximum pressure for a floating ball valve?

Floating ball valves are typically available up to Class 1500, but are most common in Class 150 to 600. For higher pressures or larger sizes, a trunnion ball valve is recommended.

Q: What is the typical lead time for floating ball valves?

Standard lead time is typically 3 to 5 weeks depending on size, material, and end connection. Custom actuator mounting may add time.

Q: Is the stem anti-blowout?

Yes. The stem is assembled from underneath and features a backseat design that prevents blowout even if the packing fails.

Contact

For API 608 floating ball valve selection, contact HYRIG: info@hyrig.com

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit