HYRIG can supply the API 6D trunnion ball valve range. The API 6D trunnion ball valve is a quarter-turn pipeline isolation valve with a ball anchored on upper and lower trunnion bearings. It is specified for Class 150 to 2500 pipelines where full bore, DBB capability, and fire-safe performance are required.
| Parameter | Class 150 | Class 300 | Class 600 | Class 900 | Class 1500 | Class 2500 |
|---|---|---|---|---|---|---|
| Size Range | NPS 4-36 | NPS 4-36 | NPS 2-24 | NPS 2-16 | NPS 1.5-12 | NPS 1.5-10 |
| Face-to-Face RF (NPS 6) | 394 mm | 403 mm | 559 mm | 610 mm | 705 mm | 914 mm |
| Face-to-Face BW (NPS 6) | 457 mm | 457 mm | 559 mm | 610 mm | 705 mm | 914 mm |
| Bore d (NPS 6) | 150 mm | 150 mm | 150 mm | 150 mm | 144 mm | 131 mm |
| Weight Handwheel (NPS 6) | 101 kg | 128 kg | 241 kg | 325 kg | 475 kg | 760 kg |
| Dimension | Standard / Range |
|---|---|
| Face-to-Face (RF) | ASME B16.10 |
| Face-to-Face (BW) | ASME B16.10 / API 6D |
| Flanged Ends | ASME B16.5 / ASME B16.47 |
| Butt-Weld Ends | ASME B16.25 |
| Actuator Mounting | ISO 5211 |
The ball is fixed between upper and lower trunnion bearings, so line pressure does not push the ball into the downstream seat. Instead, spring-loaded seat rings press against the ball from both sides, producing bidirectional sealing. This structure provides double block and bleed (DBB) capability: with the ball closed, both seats seal independently, and the body cavity can be vented to confirm isolation integrity.
Replacing a floating ball valve with a trunnion design? Check these 4 points before ordering: 1. Actuator torque (trunnion torque is constant, floating torque rises with pressure). 2. Face-to-face dimension (verify RF vs BW). 3. DBB requirement (trunnion supports cavity venting). 4. Fire-safe certificate scope (ensure it covers your specific size and class).
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure whether your application requires full bore or reduced bore, or which pressure class is appropriate? Share your line size, medium, and isolation requirement, and our engineers will confirm the correct trunnion configuration.
Q: Does this valve support double block and bleed?
Yes. The bi-sealing trunnion structure provides independent upstream and downstream sealing, allowing cavity bleed to confirm isolation.
Q: What is the typical lead time for trunnion ball valves?
Standard lead time is typically 4 to 6 weeks depending on size, class, and material. Fire-safe testing with third-party witness may add 1 to 2 weeks.
Q: What is the difference between full bore and reduced bore?
Full bore means the valve opening matches the pipe inner diameter, allowing pigs to pass. Reduced bore has a smaller opening, which reduces valve size and cost but restricts pigging.
For API 6D trunnion ball valve selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.