HYRIG can supply the API ball valve range. The API ball valve is a quarter-turn isolation valve used in pipelines to start or stop the flow of media. It is available in floating and trunnion-mounted designs, covering Class 150 to Class 2500, with full bore or reduced bore configurations.
| Feature | Floating Ball Valve | Trunnion Ball Valve |
|---|---|---|
| Pressure Class | Class 150 - 1500 | Class 150 - 2500 |
| Size Range | NPS 1/2 - 10 | NPS 1 1/2 - 36 |
| Seal Design | Downstream seat sealing | Bi-directional, spring-loaded seats |
| DBB Capability | No | Yes |
| Typical Application | General service, smaller sizes | High-pressure, mainline, pigging |
| Parameter | Standard |
|---|---|
| Face-to-Face | ASME B16.10 |
| Flanged Ends | ASME B16.5 / ASME B16.47 |
| Butt-Weld Ends | ASME B16.25 |
| Actuator Mounting | ISO 5211 |
The API ball valve features a spherical ball with a through-hole. When the ball is rotated 90 degrees, the flow is stopped. Floating ball valves rely on line pressure to push the ball against the downstream seat for sealing. Trunnion ball valves anchor the ball mechanically and use spring-loaded seats, making them suitable for higher pressures and larger sizes where operating torque must be minimized.
When upgrading or replacing an existing valve, verify these points: 1. Face-to-face dimension to ensure pipeline alignment. 2. Flange standard and pressure class. 3. Actuator mounting flange and stem dimensions. 4. Bore size to maintain flow capacity.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure which valve design fits your pipeline? Share your line size, pressure class, and medium, and our engineers will confirm the correct API ball valve configuration.
Q: What is the difference between floating and trunnion ball valves?
Floating ball valves use line pressure to seal against the downstream seat and are cost-effective for smaller sizes. Trunnion ball valves use spring-loaded seats and mechanical anchors, supporting higher pressures and larger sizes.
Q: What is the typical lead time for API ball valves?
Standard lead time is typically 4 to 6 weeks, depending on the pressure class, material, and size. Fire-safe testing or third-party inspection may require additional time.
Q: Are these valves fire-safe?
Yes. The valves are designed with a secondary metal-to-metal seal and can be certified to API 607 or API 6FA for fire-safe performance.
For API ball valve selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.